Comnet FVT110M Manuel d'installation et d'utilisation

Parcourez en ligne ou téléchargez le pdf Manuel d'installation et d'utilisation pour {nom_de_la_catégorie} Comnet FVT110M. Comnet FVT110M 8 pages. 10-bit digital video with one bi-directional data channel

Imprimer la page

INSTALLATION AND OPERATION MANUAL

FVT/FVR110(M,S)1[/M]

10-BIT DIGITAL VIDEO WITH

ONE BI-DIRECTIONAL DATA CHANNEL

The ComNet

FVT/FVR110 series is a video transmitter/receiver and data transceiver

™

that supports the simultaneous transmission of short haul quality 10-bit EIA RS-250C

digitally encoded video and bi-directional data over one multimode or single mode

optical fiber. The FVT110 also transmits a single bi-directional contact closure signal.

The module is universally compatible with major CCTV camera manufacturers.

Figures 6 and 7 starting on Page 4 illustrate the specific data connections for

RS232, RS422, 2 or 4-wire RS485 data transmission.

The FVT/FVR110 also supports "up-the-coax" data transmission from all major

manufacturers, utilizing time-base correction these units can achieve distances of

48km. The FVT/FVR110 supports Panasonic Proteus

Bilinx

Up-the-Coax systems.

™

Bi-color (Red/Green) LED indicators are provided for rapidly ascertaining equipment

operating status. Figure 10 on Page 6 describes the LED indicators for each light on

the unit.

The FVT110 and FVR110 units are interchangeable between stand-alone or card

mount configurations, or may be DIN-rail mounted by the addition of ComNet

model DINBKT1 adaptor plate. The FVT110M is stand-alone only. See Figure A on

Page 8 for mounting instructions.

, Pelco Coaxitron

and Bosch

™

INS_FVT/FVR110_REV–

10/27/11

PAGE 1