Comnet FDX55S2 Manuel d'instructions d'installation

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions d'installation pour {nom_de_la_catégorie} Comnet FDX55S2. Comnet FDX55S2 12 pages. Rs-232/422 drop and repeat data transceiver

Imprimer la page

FDX55 SERIES

RS-232/422 DROP AND REPEAT

INSTALLATION INSTRUCTIONS

DATA TRANSCEIVER

ADDENDUM

The Comnet FDX55 Series has recently undergone some enhancements.

The three enhancements are summarized here. Please verify which version

of the FDX55 you have by examining the front and rear panels for the following

changes. These changes are reflected in this Installation and Operation

manual and will allow you to correctly configure the device for proper operation.

1) The silk screened printing on the front of each FDX55 Series device had

previously shown a "JABBER RESET" button. The silk screened printing was changed

and now reads "ANTI-STREAMING RESET" for this button.

2) Linking port J3 originally used an RJ-45 receptacle.

This now has been changed to an RJ-11 receptacle.

3) The FDX55 was originally designed as a DCE device with a switch labeled "NA/DCE"

to allow for possible future use as a true "DCE/DTE" switch. The device has now changed to

allow for the selection of DCE or DTE via the front panel switch labeled DTE/DCE.

The setting of this switch is detailed later in this manual.