Comnet FDX60S2-M Manuel d'installation et d'utilisation
Parcourez en ligne ou téléchargez le pdf Manuel d'installation et d'utilisation pour {nom_de_la_catégorie} Comnet FDX60S2-M. Comnet FDX60S2-M 9 pages. Fdx60 series. single or dual rs232/rs422/rs485(2/4w) data transceiver
Imprimer la page
INSTALLATION AND OPERATION MANUAL
FDX60(M)(S)(-M)
SINGLE OR DUAL
RS232/RS422/RS485(2/4W)
DATA TRANSCEIVER
The ComNet™ FDX60(M)(S)(-M) data transceivers provide point-to-point
transmission of simplex or duplex EIA RS232/RS422/RS485 (2W/4W) data
signals over one or two optical fibers. The transceivers are transparent to data
encoding allowing for broad-range compatibility. Models within this series are
available for use with multimode or single mode optical fiber.
Each transceiver incorporates a bi-color (Red/Green) indicating LED for
monitoring proper system operation. See Figure 8 on Page 6 for LED Indicator
explanations.
The FDX60(M)(S)(-M) has a built-in fiber link test feature that allows for the
testing of the fiber. See Figure 13 on Page 8 for an explanation of the Loop
Back Test Mode.
The FDX60(M)(S) may be directly plugged into the ComNet Rack (Part C1) or
they can operate as standalone modules. The FDX60(M)(S)-M has a small
footprint and is designed for surface mounting. See Figures A and B on
Page 9 for mounting instructions.
See Figures 1 – 13 for complete installation details.
INS_FDX60_REV–
04/23/10
PAGE 1