Electrolux EGG64272M Manuel de l'utilisateur - Page 15
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Electrolux EGG64272M. Electrolux EGG64272M 20 pages.
Imprimer la page
the burner as shown in the picture. This way,
a pan support is stable and fixed.
7.4 Cleaning the hob
• Remove immediately: melted plastic,
plastic foil, salt, sugar and food with sugar,
otherwise, the dirt can cause damage to
the hob. Take care to avoid burns.
• Remove when the hob is sufficiently
cool: limescale rings, water rings, fat
stains, shiny metallic discoloration. Clean
8. TROUBLESHOOTING
WARNING!
Refer to Safety chapters.
8.1 What to do if...
Problem
There is no spark when you try to
activate the spark generator.
The flame extinguishes immediately
after ignition.
The flame ring is uneven.
the hob with a moist cloth and a non-
abrasive detergent. After cleaning, wipe
the hob dry with a soft cloth.
• To clean the enamelled parts, caps and
crowns, wash them with warm soapy
water and dry them carefully before you
put them back on.
7.5 Cleaning the spark plug
This feature is obtained through a ceramic
ignition candle with a metal electrode. Keep
these components well clean to prevent
difficult lighting and check that the burner
crown holes are not obstructed.
7.6 Periodic maintenance
Speak to your local Authorised Service
Centre periodically to check the conditions of
the gas supply pipe and the pressure
adjuster, if fitted.
Possible cause
The hob is not connected to an elec‐
trical supply or it is connected incor‐
rectly.
The fuse is blown.
Burner cap and crown are placed in‐
correctly.
Thermocouple is not heated up suf‐
ficiently.
Burner crown is blocked with food
residues.
Remedy
Check if the hob is correctly connec‐
ted to the electrical supply.
Make sure that the fuse is the cause
of the malfunction. If the fuse is
blown again and again, contact a
qualified electrician.
Place the burner cap and crown cor‐
rectly.
After lightning the flame, keep the
knob pushed for equal or less than
10 seconds.
Make sure that the injector is not
blocked and the burner crown is
clean.
ENGLISH
15