Electrolux EGG64272M Manuel de l'utilisateur - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Electrolux EGG64272M. Electrolux EGG64272M 20 pages.

• Do not use the appliance before installing it in the built-in

structure.

• Do not use a steam cleaner to clean the appliance.

• If the glass ceramic surface / glass surface is cracked,

switch off the appliance and unplug it from the mains. In

case the appliance is connected to the mains directly using

junction box, remove the fuse to disconnect the appliance

from power supply. In either case contact the Authorised

Service Centre.

• In case of hotplate glass breakage:

– shut immediately off all burners and any electrical

heating element and isolate the appliance from the power

supply,

– do not touch the appliance surface,

– do not use the appliance.

• If the supply cord is damaged, it must be replaced by the

manufacturer, an authorized Service or similarly qualified

persons in order to avoid a hazard.

• Where the appliance is directly connected to the power

supply, an all-pole isolating switch with a contact gap is

required. Complete disconnection in compliance with the

conditions specified in overvoltage category III must be

guaranteed. The earth cable is excluded from this.

• When you route the mains cable, make sure that the cable

doesn't come into direct contact (for example using

insulating sleeving) with parts that can reach temperatures

of more than 50°C above room temperature.

• WARNING: Use only hob guards designed by the

manufacturer of the cooking appliance or indicated by the

manufacturer of the appliance in the instructions for use as

suitable or hob guards incorporated in the appliance. The

use of inappropriate guards can cause accidents.

ENGLISH