Electrolux EGWP9353 Manuel de l'utilisateur - Page 15

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Electrolux EGWP9353. Electrolux EGWP9353 20 pages.

Imprimer la page

2. The supply system is equipped with

an efficient earth connection in

compliance with the current standards

and regulations

3. The outlet or omnipolar switch used

for connection is easily accessible with

the appliance installed.

The appliance is supplied with a 3 core

flexible power cable with a 3 amp plug. If it

is necessary to change the fuse, use a 3

amp ASTA-approved (BS 1362) fuse.

A. Green and Yellow

B. 3 amp fuse

C. Brown

D. Cord clamp

E. Blue

The wires in the cord are coloured as

follows:

Green and yellow

Blue

Brown

WARNING!

A cut off plug inserted into a

13 amp socket is a serious

shock hazard. Ensure that

the cut off plug is disposed of

safely.

- Earth

- Neutral

- Live

8.7 Replacement of the

connection cable

The replacement of electric

cable must be carried out

exclusively by the service

force centre or by personnel

with similar competencies, in

accordance with the current

regulations.

To replace the connection

cable use only H03V2V2-F

T90 or equivalent type. Make

sure that the cable section is

applicable to the voltage load

and the working temperature.

The yellow/green earth wire

(B) must be approximately 2

cm longer than the live and

neutral wire (A).

1. Connect the green and yellow (earth)

wire to the terminal which is marked

with the letter 'E', or the earth symbol

, or coloured green and yellow.

2. Connect the blue (neutral) wire to the

terminal which is marked with the

letter 'N' or coloured blue.

3. Connect the brown (live) wire to the

terminal which is marked with the

letter 'L'. It must always be connected

to the network phase. There must be

no cut or stray strands of wire present.

The cord clamp must be correctly

attached to the outer sheath.

ENGLISH