Dremel Idea Builder 3D20-01 Manuel de démarrage rapide - Page 2
Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} Dremel Idea Builder 3D20-01. Dremel Idea Builder 3D20-01 2 pages.
Également pour Dremel Idea Builder 3D20-01 : Manuel de démarrage rapide (2 pages), Manuel de démarrage rapide (2 pages)
Imprimer la page
1.800.544.2843
5
Getting Ready to Build (continued...)
LEVELING BUILD PLATFORM
1. Tap "Tools" on your Dremel 3D20's touch screen and
tap "Level".
2. First level the front left of the build platform.
3. Place the leveling sheet between the extruder and build
platform.
a) If the leveling sheet cannot slide between the extruder
and build platform, turn the knob counterclockwise until
you can slide the leveling sheet between the extruder and
build platform with some resistance.
b) If the leveling sheet can slide between the extruder and
build platform too easily, turn the knob clockwise until you
can slide the leveling sheet between the extruder and build
platform with some resistance.
4. Tap "Next" to move the build platform toward the right knob
and repeat step above.
5 Tap "Next" to move the build platform toward the rear knob
and repeat step above.
6. Tap "Finish" to complete the leveling process.
6
Building
BUILDING OUT OF THE BOX
1. On the main screen, tap the "Build" option. Then tap the
machine icon to select from pre-installed models.
2. Tap on the model file you would like to build and tap "Build".
3. Your Dremel 3D20 will align the extruder with the build
platform and will begin heating the extruder.
4. Once the build temperature is reached, your model will
begin to build.
5. Touch screen will display "Object Finished" . Tap the check
box to confirm. Wait until the touch screen indicates that
the extruder temperature is "COOL" .
REMOVING YOUR OBJECT FROM THE BUILD
PLATFORM
6. Wait for the extruder to cool before removing your object.
7. With the object still attached, remove build platform from
the build area.
8. Use your hand to peel your object from the build platform. If
needed, gently use the object removal tool to remove object
from build platform.
7
Best Practices & Resources
BEST PRACTICES
1. ALWAYS USE BUILD TAPE.
2. Ensure your platform is level (before you begin building
your object).
3. Ensure spool is installed properly and can rotate freely.
4. When loading filament, allow Dremel 3D20 to extrude until
material is consistent with the installed filament color.
5. It is important to stay near your Dremel 3D20 during
operation and watch the Dremel 3D20 begin building
objects. (If a situation occurs, select the STOP icon right
away, to stop any further building).
6. Remove the build platform before removing the object.
7. Use object removal tool gently to avoid damaging the build
platform or object.
8
GETTING STARTED
2. Register your Idea Builder to gain access to all available models and support
from the Dremel Experts.
4. Review the Dremel 3D Quick Start Guide online to watch videos on how to easily
set up your Idea Builder.
KICKSTART YOUR 3D PRINTING EXPERIENCE
• Once you have built the Dremel 3D test print located on your Idea Builder,
verifying that your printer is set up properly, consider printing something more
personalized.
• Ready to design something from scratch? Try other free design tools developed
by Autodesk including TinkerCad, Meshmixer, 123D Design, or 123D Sculpt.
Build on Dremel Maker, Build on.
SIDE 2
www.calcert.com
15
10
20
5
25
0
30
STEP 1: LEFT ADJUSTMENT
WARM
NEXT
TURN
LEFT
TO
RAISE
THE BUILD PLATFORM
TURN
RIGHT
TO
LOWER
THE BUILD PLATFORM
BACK
1
2
TURN LEFT TO RAISE
THE BUILD PLATFORM
TURN RIGHT TO LOWER
3
WARM
WARM
STEP 2: RIGHT ADJUSTMENT
STEP 3: BACK ADJUSTMENT
NEXT
NEXT
TURN
LEFT
TO
RAISE
TURN
LEFT
TO
RAISE
THE BUILD PLATFORM
THE BUILD PLATFORM
TURN
RIGHT
TO
LOWER
TURN
RIGHT
TO
LOWER
THE BUILD PLATFORM
BACK
THE BUILD PLATFORM
BACK
4
5
1
2
4
8
OPERATING ENVIRONMENT
Room Temperature: 16-29° C (60 - 85° F)
Level workspace
WALL
Dry workspace environment
8" (203mm)
8" (203mm)
19.1" (485mm)
13.2" (335mm)
Part#: 2610035692