Bosch GLI PortaLED 102 Manuel d'instructions original - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions original pour {nom_de_la_catégorie} Bosch GLI PortaLED 102. Bosch GLI PortaLED 102 9 pages. Gli portaled professional
Également pour Bosch GLI PortaLED 102 : Manuel d'utilisation (17 pages), Manuel (5 pages)

Imprimer la page
Bosch GLI PortaLED 102 Manuel d'instructions original
OBJ_BUCH-1497-003.book Page 11 Thursday, November 29, 2012 10:02 AM
Adjusting the Brightness
Briefly press the On/Off switch 1 to switch on the cordless
worklight with maximum brightness. To adapt any of the 3
brightness steps, press and hold the On/Off switch 1 until the
desired brightness is reached.
Temperature Dependent Overload Protection
When exceeding the allowable heat-sink temperature of
60 °C, the cordless worklight switches off. Allow the cordless
worklight to cool down, then switch the cordless worklight on
again.
Working Advice (see figure B–C)
With the support bracket 6, you can lock the case lid in a 45 °
position. The cordless worklight can also be operated when
the case lid is completely opened or closed.
When the lighting duration is ≤ 10 minutes, the cordless
worklight flashes 3x and the luminous efficiency is lower.

Maintenance and Service

Maintenance and Cleaning

When the battery is no longer operative, please refer to an au-
thorised after-sales service agent for Bosch power tools.
The cordless worklight is maintenance-free and and contains
no components that must be replaced or maintained.
To avoid damage, clean the plastic lens of the cordless work-
light only with a dry, soft cloth. Do not use cleaning agents or
solvent.
If the cordless worklight should fail despite the care taken in
manufacturing and testing procedures, repair should be car-
ried out by an authorized after-sales service agent for Bosch
power tools.
In all correspondence and spare parts orders, please always
include the 10-digit article number given on the nameplate of
the cordless worklight.
After-sales Service and Application Service
Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. Exploded views and information on spare parts can al-
so be found under:
www.bosch-pt.com
Bosch's application service team will gladly answer questions
concerning our products and their accessories.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
Tel. Service: (0844) 7360109
Fax: (0844) 7360146
Bosch Power Tools
Ireland
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: (01) 4666700
Fax: (01) 4666888
Australia, New Zealand and Pacific Islands
Robert Bosch Australia Pty. Ltd.
Power Tools
Locked Bag 66
Clayton South VIC 3169
Customer Contact Center
Inside Australia:
Phone: (01300) 307044
Fax: (01300) 307045
Inside New Zealand:
Phone: (0800) 543353
Fax: (0800) 428570
Outside AU and NZ:
Phone: +61 3 95415555
www.bosch.com.au
Republic of South Africa
Customer service
Hotline: (011) 6519600
Gauteng – BSC Service Centre
35 Roper Street, New Centre
Johannesburg
Tel.: (011) 4939375
Fax: (011) 4930126
KZN – BSC Service Centre
Unit E, Almar Centre
143 Crompton Street
Pinetown
Tel.: (031) 7012120
Fax: (031) 7012446
Western Cape – BSC Service Centre
Democracy Way, Prosperity Park
Milnerton
Tel.: (021) 5512577
Fax: (021) 5513223
Bosch Headquarters
Midrand, Gauteng
Tel.: (011) 6519600
Fax: (011) 6519880
English | 11
1 609 92A 01X | (29.11.12)