Compac ComTank Fiche d'installation - Page 14

Parcourez en ligne ou téléchargez le pdf Fiche d'installation pour {nom_de_la_catégorie} Compac ComTank. Compac ComTank 18 pages.

Powering up

Pricing via USB Module

Pricing via Internet

Compac Industries Ltd.

When all connections have been made and checked. Install the protective perspex

cover over the terminals.

Where regulations require, a registered electrician must check and

approve connections.

Connect power to the unit and turn on the circuit breaker.

Check that the PIN pad screen (if fitted) is illuminated and boots up.

If the unit is controlled via the internet, contact your help desk and confirm that the

unit is on line. Confirm the on-line pump pricing.

The following is a brief overview for technicians who are experienced in the

installation and setup of similar equipment. Specific instructions for each option are

either supplied or available from Compac.

The ComTank unit controls the pricing at the pumps. In most circumstances the

pricing information is sent to the unit either via a USB key or via the internet using

Netbase or CompacOnline.

Start up your laptop, insert the Compac USB key and open the Price file. Check the

price is correct. If not, change it and save.

Insert the key into the USB module, select Set Price and confirm.

Turn off the unit and the pumps, connect the pump communications wires and

repower.

Check that the pricing on each hose is correct.

Confirm that the unit is on line and that the help desk has installed all updates.

Write down the on-line price(s).

Turn off the unit and the pumps, connect the pump communications wires and

repower.

Check that the price on each hose matches the on-line price.

Page 14

Modem Connections