Compac ComTank Fiche d'installation - Page 8

Parcourez en ligne ou téléchargez le pdf Fiche d'installation pour {nom_de_la_catégorie} Compac ComTank. Compac ComTank 18 pages.

Pre-installation Checks

Transit Damage

Tampering

Vibration

Site Issues

Compac Industries Ltd.

Once the unit is received on site, inspect the unit for the following:



Shipping damage to housing, display or any other equipment.



Water damage to components

Report any damage to the transport company and to the help desk.

Take photographs if required.

Inspect for:



Evidence of tampering with the unit especially card reader or unauthorised

wiring.

Report any concerns to the help desk.

Take photographs if required.

Inspect terminals, plugs and IC chips to check they are securely in place and have

not loosened due to vibration.

Check that all wiring and pipework has been installed correctly and is undamaged.

Report issues to site manager.

Inappropriate installation may void the warranty. If uncertain, contact

your Compac agent for advice.

Refer to the Site Audit document if supplied.

To ensure maximum operating life, care should be taken when installing the

ComTank components. Considerations should include:



The card reader and PIN pad should face away from the prevailing wind

especially in dusty or wet areas.



In areas experiencing extremes of weather (heat, cold, wind, rain, salt spray

etc.) consideration should be given to installing additional shelter.



The rear of the displays and the electrical components must be protected from

dust, water or high humidity. Any protective surrounds that are constructed must

also allow for adequate cooling.

Inappropriate installation may void the warranty. If uncertain, contact

your Compac agent for advice.

Page 8

Pre-installation Checks