Compac WD60 G2 Manuel d'instruction - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Compac WD60 G2. Compac WD60 G2 14 pages. Wheel dolly

Imprimer la page
Instruction Manual (GB)
Compac wheel dolly, model WD60 G2.
Important: Read and understand the instruction before use!
Important: Read and understand the instruction before use!
Important: Read and understand the instruction before use!
Important: Read and understand the instruction before use!
Operating and service manual for wheel dolly model WD 60.
Capacity: Max. 60 kg.
Owner
Owner
Owner
Owner
This instruction and safety manual must be enclosed with the wheel dolly at all times.
This instruction and safety manual
This instruction and safety manual
This instruction and safety manual
It is very important that the owner and the operator completely understand the operating, safety
and maintenance instructions before use. The manufacturer is not liable for wrong- or irresponsible
use or maintenance due to the operators not knowing and following these instructions. If the
operator is not fluent in English, then these instructions and warnings shall be read and explained
to the operator in the operator's native language, making sure that he understands its contents.
Application:
WD 60 is a mobile wheel dolly for easy and safe demounting, handling and mounting of low profile
aluminium wheels up to 24 " fitted with tires that have outer diameters up to 820 mm, a width of
maximum 310 mm and a maximum weight of 60 kg.
Preparation:
After opening the packaging, check the product for visible
Assemble the product, then remove the transport plug (X), and insert the plug with venting (Y)
instead (Fig. 1). This is done to prevent the formation of pressure / vacuum in the oil reservoir, and
to
avoid
E
Functional Description:
1.
Foot pedal (A) (Fig. 2) is used to raise the lifting forks.
(The wheel is lifted by a lifting beam, with 2 rolls which supports the wheel.)
2.
The lowering handle (E) (Fig. 1) is used to lower the wheel dolly's lifting beam.
Turning the handle counter clock-wise will lower the lifting beam, turning the handle clockwise
will slow the lowering speed / stop the lowering.
3.
The handles (C) and (D) (Fig. 4 - 5) are used to move / steering the wheel dolly.
C
and
and
and
and
must be enclosed with the wheel dolly at all times.
must be enclosed with the wheel dolly at all times.
must be enclosed with the wheel dolly at all times.
air
formation
Fig.
x
Y
Fig. 4
user
user
user
user
damage and leakage.
in
the
hydraulic
Fig. 2
A
Fig. 5
responsibilities:
responsibilities:
responsibilities:
responsibilities:
system.
D
2