Compac Furniture CUBO CUB-CU128-FP Manuel d'instructions pour l'assemblage - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions pour l'assemblage pour {nom_de_la_catégorie} Compac Furniture CUBO CUB-CU128-FP. Compac Furniture CUBO CUB-CU128-FP 8 pages.

Imprimer la page

CUBO CUB-CU128-FP

STEP ONE: Install Hardware in TOP and BASE

•

Lay the TOP and the BASE on a clean clear surface with the holes facing UPWARDS.

•

Install six H1 CONNECTING BOLTS in the holes in the TOP and the BASE as shown below. These two parts

are identical, so you don't need to worry about mixing them up.

STEP TWO: Install Hardware in the ENDS

•

Take the ENDS and lay them with the holes facing UPWARDS.

•

Install four H2 CAMS in each END. Ensure that the arrow on the top of each Cam points to the unfinished

edge.

•

Install four H1 CONNECTING BOLTS in each END as shown below:

H2 Cams

For assembly advice or parts go to www.compacfurniture.co.nz or call 0800 100 858

H1 Connecting Bolts

...................

H1 Connecting Bolts

H2 Cams