AirTech ACR35-SELV Instructions d'installation et de câblage
Parcourez en ligne ou téléchargez le pdf Instructions d'installation et de câblage pour {nom_de_la_catégorie} AirTech ACR35-SELV. AirTech ACR35-SELV 12 pages.
Imprimer la page
IPX7
ACR35-SELV & ACR35CV-SELV
Installation and Wiring Instructions
SAFETY AND GUIDANCE NOTES
All wiring to be in accordance with the current I.E.T.
Regulations, or the appropriate standards of your country and
MUST be installed by a suitably qualified person.
The Fan is suitable for installation within Zones 1 & 2.
The Fan should be provided with a local isolator switch
capable of disconnecting all poles, having a contact separation
of at least 3mm.
Ensure that the mains supply (Voltage, Frequency, and Phase)
complies with the rating label.
The Fan should only be used in conjunction with the
appropriate Airtech products.
The fan should only be used in conjunction with fixed wiring.
When the Fan is used to remove air from a room containing a
fuel-burning appliance, ensure that the air replacement is
adequate for both the fan and the fuel-burning appliance.
The Fan should not be used where it is liable to be subject to
direct water spray for prolonged periods of time.
Where ducted Fans are used to handle moisture-laden air, a
condensation trap should be fitted. Horizontal ducts should be
arranged to slope slightly downwards away from the Fan.
This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities,
or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the
appliance by a person responsible for their safety.
Young children should be supervised to ensure that they do
not play with the appliance.