Electrolux ICON E36GC75DSS Manuel d'utilisation et d'entretien - Page 17
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation et d'entretien pour {nom_de_la_catégorie} Electrolux ICON E36GC75DSS. Electrolux ICON E36GC75DSS 20 pages. Gas cooktop
Également pour Electrolux ICON E36GC75DSS : Spécifications (1 pages)
Imprimer la page
CLEANING RECOMMENDATIONS FOR THE CERAMIC GLASS
COOKTOP (CONTINUED)
CAUTION
!
Damage to the ceramic glass cooktop may occur if you use scrub pad.
Plastic or foods with a high sugar content:
These types of soils need be removed immediately if spilled or melted onto the ceramic cooktop
surface. Permanent damage (such as pitting of the cooktop surface) may occur if not removed
immediately. After turning the surface elements OFF, use a razor blade scraper or a metal
spatula with a mitt and scrape the soil from the hot surface (as illustrated on previous page).
Allow the cooktop to cool, and use the same method for heavy or burned on soils.
Do not use the following on the ceramic glass cooktop:
Do not use abrasive cleaners and scouring pads, such as metal
and some nylon pads. They may scratch the cooktop, making it
more difficult to clean.
Do not use harsh cleaners, such as chlorine bleach, ammonia
or oven cleaners, as they may etch or discolor the cooktop.
Do not use dirty sponges, cloths or paper towels, as they can
leave soil or lint on the cooktop which can burn and cause
discoloration.
Special Caution for Aluminum Foil and Aluminum Cooking Utensils
Aluminum foil - Use of aluminum foil will damage the cooktop. Do not use thin aluminum
cooking utensils or allow foil to touch the ceramic cooktop under ANY circumstances.
Aluminum utensils - The melting point of aluminum is much lower than that of other metals.
Care must be taken when aluminum pots or pans are used on the cooktop. If allowed to boil
dry, not only will the utensil be destroyed, but it may fuse to, break or mark the ceramic
glass surface,permanently damaging the cooktop surface.
CARE AND CLEANING OF STAINLESS STEEL
Special care and cleaning are required for maintaining the appearance of stainless parts.
Please refer to the table provided at the beginning of the General Care & Cleaning section
in this Use & Care Manual.
General Care & Cleaning
17