Atlantic Timelis Manuel d'installation - Page 13

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Atlantic Timelis. Atlantic Timelis 16 pages. Electric towel warmer with remote programmer

Imprimer la page

1/ Advice for use

- There is no point in setting the heated towel rail to maximum, the bathroom will not heat up any quic-

ker.

- For optimum heating, towels should be hung over the warm rails and dressing-gowns on the clothes

hooks supplied.

2/ Advice

- Children must not climb on the towel rail.

- Do not let children lean against the towel rail or play nearby when it is on. In some circumstances

its surface can get hot enough to burn, especially since their reflexes are still undeveloped or are slo-

wer than an adult's. If there is a risk, consider installing a protective grille in front of the heated towel

rail.

- This heated towel rail is not untended for use by people (including children) whose physical, sensorial

or mental capacities are reduced, by people who are inexperienced or unaware, unless the person

responsible for their safety is supervising them, or has given them instructions in advance on how to

use the heated towel rail.

- For avoid any danger for very young children, you are advised to install this appliance so that the lo-

west heating bar is at least 600 mm from the floor.

- For safety reasons, it is strictly forbidden to re-fill the appliance. If this is needed, contact the manu-

facturer's after-sales department or a qualified professional.

- Any repairs to the electrical parts must be done by a qualified professional.

- Do not insert objects or paper in the heated towel rail.

- The first time the towel rail heats up a slight smell may appear, from the release of the last traces

of material used in its manufacture.

3/ Maintenance

To maintain the performance of the heated towel rail, it needs dusting about twice a year with a soft

cloth or a vacuum cleaner with brush attachment. Turn your heater off by moving the knob to

and let it cool down.

Do not use abrasives or solvents.

Advice