Andrew 75E LFL Antenna Manuel d'instructions de montage - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions de montage pour {nom_de_la_catégorie} Andrew 75E LFL Antenna. Andrew 75E LFL Antenna 15 pages. Rxtx antenna and co-located antenna systems
Également pour Andrew 75E LFL Antenna : Manuel d'instructions de montage (13 pages), Manuel d'instructions de montage (12 pages)

Imprimer la page
75E RX TX FEED ASSEMBLY
4
Insert O-Ring in recessed area of RxTx Feed
Assembly. Align flange of Wave Guide
Bend with holes on Support arm and place
Wave Guide Bend on
Support Arm.
RxTx FEED
ASSEMBLY
O-RING
WAVE
GUIDE
BEND
75E CO-LOCATED FEED ASSEMBLY
Attach BUC Bracket to Support Arm
with M4 x 16 mm Philips Head Screws, Lock
Washers, Washers and M4 Hex Head Nuts.
Tighten securely.
M4 HEX HEAD NUT
(2 PLACES)
M4 FLAT
WASHER
(2 PLACES)
Fasten Wave Guide Bend to BUC Bracket with M4 x 16 mm Philips Head Screws, Lock Washers, Washers, and M4 Hex
Head Nuts. Loosely tighten. Do not Tighten securely until O-Ring is inserted in Co-Located Feed Assembly.
SUPPORT
ARM
BUC BRACKET
M4 HEX HEAD NUT
(2 PLACES)
M4 FLAT
WASHER
(2 PLACES)
WAVE GUIDE BEND
Attach Wave Guide Bend to Support
Arm with M4 x 16 mm Philips
Head Screws, Lock Washers,
Washers and M6 Hex Head
Nuts. Tighten securely.
M4 HEX
HEAD NUT
(2 PLACES)
M4 FLAT
WASHER
(2 PLACES)
WAVE
GUIDE
BEND
BUC BRACKET
LOCK WASHER
(2 PLACES)
M4 x 16mm
PHILIPS HEAD
SCREW
(2 PLACES)
M4 LOCK WASHER
(2 PLACES)
M4 x 16mm
PHILIPS HEAD
SCREW
(2 PLACES)
6
M4 LOCK
WASHER
(2 PLACES)
M4 x 16mm
PHILIPS HEAD
SCREW
(2 PLACES)
Align open slots
on flange of
Wave Guide Bend
with holes of
BUC Bracket
and place
Wave Guide Bend
on Buc Bracket.
WAVE GUIDE BEND
BUC
BRACKET