Electrolux 36" Ceramic Manuel d'installation, d'utilisation et d'entretien - Page 13

Parcourez en ligne ou téléchargez le pdf Manuel d'installation, d'utilisation et d'entretien pour {nom_de_la_catégorie} Electrolux 36" Ceramic. Electrolux 36" Ceramic 22 pages. 30” and 36” free-standing range hood
Également pour Electrolux 36" Ceramic : Manuel d'utilisation et d'entretien (26 pages), Manuel d'instructions d'installation (7 pages), Manuel d'instructions d'installation (25 pages), Manuel d'instructions d'installation (8 pages)

Imprimer la page

Making the electrical connections

Electrical Shock Hazard

Warning: Turn off at the service panel before wiring

this unit.

120 V AC, 15 or 20 Amp circuit required.

ELECTRICAL GROUNDING INSTRUCTIONS

THIS APPLIANCE IS FITTED WITH AN ELECTRICAL

JUNCTION BOX WITH À WIRES, ONE OF WHICH

ôGREEN/YELLOWÈ SERVES TO GROUND THE

APPLIANCE. TO PROTECT YOU AGAINST

ELECTRIC SHOCK, THE GREEN AND YELLOW

WIRE MUST BE CONNECTED TO THE

GROUNDING WIRE IN YOUR

HOME ELECTRICAL SYSTEM, AND IT MUST

UNDER NO CIRCUMSTANCES BE CUT OR

REMOVED.

Failure to do so can result in death or electrical

shock.

•

Remove junction box cover and knockout on the

top left side.

•

If not already done, install 1/2" conduit connector

in junction box.

NOTE: This connector is not included with vent

hood.

Knockout

Junction box

cover

Installing the hood

House

wiring

UL listed

wire nut

•

Run black (live), white (neutral), and green

(earth) wires (#14 AWG) according to the

National Electrical Code or CSA Standards and

local codes and ordinances in 1/2" conduit from

power supply to junction box.

•

Connect black, white, and green wires from

power supply to black, white, and green/yellow

wires in junction box respectively.

•

These connections should be done always

making reference to the electrical diagram found

inside the hood.

•

Close junction box cover and reapply screws.

Metal electrical

conduit