Electrolux 36" Ceramic Manuel d'installation, d'utilisation et d'entretien - Page 20

Parcourez en ligne ou téléchargez le pdf Manuel d'installation, d'utilisation et d'entretien pour {nom_de_la_catégorie} Electrolux 36" Ceramic. Electrolux 36" Ceramic 22 pages. 30” and 36” free-standing range hood
Également pour Electrolux 36" Ceramic : Manuel d'utilisation et d'entretien (26 pages), Manuel d'instructions d'installation (7 pages), Manuel d'instructions d'installation (25 pages), Manuel d'instructions d'installation (8 pages)

Imprimer la page

Clear and Cleaning

Optional Charcoal Filters

If the model is not vented to the outside, the air will be recirculated through disposable charcoal filters that

help remove smoke and odors.

The charcoal filters cannot be cleaned.

They must be replaced.

The charcoal filters are clipped inside of each metal grease filter (mounting instructions included with charcoal

filters kit).

The charcoal filters should be replaced every 4-6 months (depending on hood usage).

NOTE: DO NOT rinse, or put charcoal filters in an automatic dishwasher.

NOTE: Charcoal filters are not included with the hood.

They must be ordered from your supplier.

Order the needed kit specifying your hood model and width size.

Char coal filter placement (Recirculating accessories)

Fit the charcoal filter mattress on the upper side of each grease filter.

Use provided springs to fix it in place.

Note: When removing for replacing for a new one do not remove Fixing Springs, simply pull out and rotate

outwards.

Cleaning

•

Always use the mildest cleaner that will do the

job. Use clean, soft cloths, sponges or paper

towels.

•

Rub stainless steel finishes in the direction of the

grain. Wipe area dry to avoid water marks.

•

After cleaning, place all parts in their proper

positions before using.

The cleaners recommended below indicate a type

and do not constitute an endorsement. Use all

products according to package directions.

Hood Surface

Painted Surfaces: For general care, wipe the outside

of the hood with sudsy water or household cleaners

such as Fantastic

with a clean soft cloth to avoid water marks.

Stainless Steel Surfaces: Wipe and dry stainless

steel in the same direction as the grain. Avoid using

too much pressure, which may mar the surface. To

Fixing

Spring

Charcoal

Filter

Grease

Filter

Top

Side

or Formula 409

, rinse well and dry

remove finger prints and give added shine, use

cleaners such as Stainless Steel Magic. Do not allow

any cleaning compounds to remain in contact with

stainless steel for extended periods.

Plastic surfaces: Wipe with a moist soapy sponge.

Rinse and dry.

Aluminum Mesh Filters: Clean filters in the dish-

washer or by agitating in sudsy water. Ensure that

there is no soil trapped in the fine mesh. Dry the

filters before reinstalling them.

Anodized Aluminum surfaces: Top cap is not remov-

able. Wash top and underside with hot sudsy water.

Rinse and wipe dry or apply Fantastic

409

first to a clean sponge or paper towel and

wipe clean. DO NOT USE powdered cleaners or

steel wool pads.

or Formula