Andrew 400BPDM-C Instructions d'installation - Page 2
Parcourez en ligne ou téléchargez le pdf Instructions d'installation pour {nom_de_la_catégorie} Andrew 400BPDM-C. Andrew 400BPDM-C 2 pages. Connector attachment
8.
Chamfer the center conductor at a 45 ° angle.
45°
10.
Tighten the connection to the torque value of
6.8-9.0 Nm (60-80 lb-in).
Note:Do not turn connector body, turn clamp nut.
部件名称
连接器
o
: 表示有毒有害物质在该部件所有的均质材料中的含量均在SJ/T 11363-2006规定的限量要求以下.
X: 表示该有毒有害物质至少在该部件的某一均质材料中的含量超出SJ/T 11363-2006规定的限量要求.
Andrew LLC
Customer Service 24 hours
U.S.A., Canada, Mexico: +1-800-255-1479
U.K.: 0800 250055 Brazil: +55-15-2102-4000
Other Europe: +44 592 782 612
Notice: Andrew LLC disclaims any liability or responsibility for the results of improper or unsafe installation, inspection, maintenance, or removal practices.
Aviso: Andrews LLC no acepta ninguna obligación ni responsabilidad como resultado de prácticas incorrectas o peligrosas de instalación, inspección, mantenimiento o retiro.
Avis : Andrew LLC décline toute responsabilité pour les conséquences de procédures d'installation, d'inspection, d'entretien ou de retrait incorrectes ou dangereuses.
Hinweis: Andrew LLC lehnt jede Haftung oder Verantwortung für Schäden ab, die aufgrund unsachgemäßer Installation, Überprüfung, Wartung oder Demontage auftreten.
Atenção: A Andrew LLC abdica do direito de toda responsabilidade pelos resultados de práticas inadequadas e sem segurança de instalação, inspeção, manutenção ou remoção.
Avvertenza: Andrew LLC declina eventuali responsabilità derivanti dell'esecuzione di procedure di installazione, ispezione, manutenzione e smontaggio improprie o poco sicure.
Burrs
6.8-9.0 Nm
(60-80 Ib-in)
表一 有毒有害物质或元素名称及含量标识格式
5 0
铅
(Part Name)
(Pb)
(Hg)
(Connector)
X
www.commscope.com
Visit our Web site at www.commscope.com or contact your local Andrew LLC representative for more information.
© 2013 CommScope, Inc. All rights reserved.
Andrew LLC is a trademark of CommScope. All trademarks identified by ® or
respectively, of CommScope. This document is for planning purposes only and is not intended to modify or supplement any
specifications or warranties relating to Andrew LLC products or services.
9.
The cable attachment must be straight and aligned with the
hole of connector inner contact; Push prepared cable attachment
into the connector body until stopped; The cable center conductor
must be inserted into the connector inner contact fingers.
Hold connector by hand
11.
Coupling torque.
有毒有害物质或元素
镉
汞
六价铬
多溴联苯
(Cd)
(Cr6+)
O
O
O
Bulletin 7677441
Revision A
Insert into hole
Hold cable by hand
25.0-30.0 N·m
(220-265 lb-in)
DIN type
多溴二苯醚
(PBB)
(PBDE)
O
O
are registered trademarks or trademarks,
TM
Page 2 of 2