Electrolux AEG DD9663-M Instructions d'utilisation et d'installation - Page 6

Parcourez en ligne ou téléchargez le pdf Instructions d'utilisation et d'installation pour {nom_de_la_catégorie} Electrolux AEG DD9663-M. Electrolux AEG DD9663-M 17 pages.

Imprimer la page

This cooker hood can be used to recirculate or extract

contaminated air.

Recirculation Mode

The cooker hood is supplied specified for use in the recir-

culation mode with the charcoal filter fitted.

The contaminated air is cleaned by passing through the

filters and than back into the kitchen.

The activated charcoal filter absorbs odours arising from

cooking. In use it will slowly become saturated in grease

and less effective. The filter normally requires changing

after at least every three months or more frequently if the

hood is used for more than three hours per day.

• Insert the connection extension pieces laterally 14.1

in connec-tion 15.

• Insert the Connector 15 into the Support bracket 7.3

and fix it with a screw.

• Make sure that the outlet of the extension pieces

14.1 is hori-zontally and vertically aligned with the

chimney outlets.

• Connect the air outlet connection 15 to the hood

body outlet using either a flexible or rigid pipe

150 mm, the choice of which is left to the installer.

• Ensure that the activated charcoal filters have been

inserted.

Extraction (Ducted)

The cooker hood is more effective when installed in the

extraction mode (ducted to the outside).

Venting kits may be purchased through your retailer or DIY

store, and must be evacuated through an outside vent of

ø125 (5ins) or ø150mm (6ins).

The ducting used must be manufactured from fire retar-

dent material conforming to the relevant British Standard

or DIN 4102-B1.

When the cooker hood is ducted to the outside the

charcoal filter must be removed.

When installing the ducted version, connect the hood to

the chimney using either a flexible or rigid pipe ø 150 or

125mm, the choice of which is left to the installer.

To install a ø 150

• Fix the pipe in position using sufficient pipe clamps

(not supplied).

To install a ø 120

• To install a ø 120 mm air exhaust connection, insert

the reducer flange 9 .

• Fix the pipe in position using sufficient pipe clamps

(not supplied).

• Remove any activated charcoal filters.

OPERATING INSTRUCTIONS

��

Fitting the Ducting

• To install the Ducting Version of the hood, the optional

Ducting chimney kit must be purchased.

Never do flambé cooking under this cooker

hood.

Take extra care when frying and never leave

frying pans unattended during use, as over-

heated fats and oils can catch fire.

Do not leave naked flames under the c ooker

hood.

Ensure the hood is switched on before using the

hob.

Ensure heating areas on your hob are covered

with pots and pans when using the hob and

cooker hood simultaneously.

Ensure not to damage the charcoal filter when

cleaning or replacing as the activated charcoal

inside is saturated with grease, which will stain if

it comes into contact with clothing or furnishings.

��

�