Andrew Barton Body Booster 2781ABBU Manuel - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Andrew Barton Body Booster 2781ABBU. Andrew Barton Body Booster 2781ABBU 12 pages. Smoothing ionic airstyler

Imprimer la page

INSTRUCTIONS FOR USE

• Plug the appliance into a suitable mains socket.

• Ensure the hair is towelled dry and combed through to remove

tangles prior to styling.

• It is not essential, but you may find it quicker and easier to use

a hairdryer first to rough dry your hair and remove the excess

moisture. Then once your hair is 80% dry, start to use the styler.

• Select the required heat and speed settings.

• Choose the attachment to use.

• ALWAYS ensure to keep hair away from the rear filter to prevent it

being sucked into the fan as this may cause the styler to overheat.

• Use the high heat / speed setting (II) for initial drying and for

thicker hair. Use the low heat / speed setting (I) for more controlled

styling and for finer or coloured hair.

• Line up the rounded raised panel on the attachment with the

corresponding raised panel on the appliance. Push the attachment

and appliance together until the buttons on either side of the

appliance click into place.

• The vent brush is perfect for general styling and introducing lift.

With the vent brush attached, place the appliance into the hair

and brush through to remove any tangles, brushing up and away

from the scalp to introduce lift.

• For added root lift and for creating body and volume, attach the

thermal brush. Place it into the hair close to the roots; hold the

brush in place at the roots for a few seconds then gently remove

from the hair trying to disturb the curl as little as possible to retain

the root lift. Alternatively place into the hair and brush down the

hair length stopping just short of the ends, wind the brush up the

hair length until it reaches the scalp, then hold in place for a few

seconds. Unwind the hair from the brush without pulling to retain

the shape you have created.

• Use the bristle brush in the same way as the thermal brush.

The smaller diameter of the brush creates greater shape and

movement in the hair.

• At any stage of styling you can set styled hair with cool air by

moving the slide switch to the first setting ✽.

• To remove the attachment, press the buttons on either side of the