Electrolux DVK6011BR Manuel d'instruction - Page 31

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Electrolux DVK6011BR. Electrolux DVK6011BR 36 pages.

3.4 - Connecting suction or filter hoods

1 - Connecting suction hoods (air is discharged into the atmosphere)

The hood comes with two air outlets, a plastic cover fitted in the

rear hole and a flange to be fitted according to the solution chosen:

top discharge (fig. 8), rear discharge (fig. 9). In case of installation

with rear discharge, fit the plastic cover in the top hole and the

flange in the rear hole. Using a pipe Ø 100 o 120 mm, connect the

air discharge flange to the external discharge duct. Open the grid

panel by pressing inwards on the knobs (fig. 10), check that the lever

(hood with one motor) or the handle (hood with two motors) points

to the ducting mode position (fig. 11), remove the charcoal filter, if

any, by turning the handle anti-clockwise (see par.3.3 2 part 2°).

Respect warning 2.1

2 - Connecting filter hoods (air is filtered and recirculated inside the

room) Open the grid panel, check that the lever (hood with one

motor) or the handle (hood with two motors) points to the filter mode

position (fig. 11), insert the charcoal filter

2°).

3.5 - Electrical connection and working test

Once the electrical connection has been completed, check that the worktop illumination, motor

and speeds work properly.

(see par.3.3 2 part