Electrolux DXK6000 Manuel de l'utilisateur - Page 32

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Electrolux DXK6000. Electrolux DXK6000 36 pages.

Maintenance

Before performing any maintenance

operation, disconnect the hood from

the electricity.

This serves to hold the grease particles in suspen-

sion. The metal filter should be washed every

month with warm soapy water or, if possible, in

the dishwasher (60°C).

Remove the filter:

● Move tabs E inwards (Fig. 2).

● Pull the grid slightly outwards and turn it

downwards.

● To remove the grid, slide it out from the right-

hand side until the grid is unhooked (Fig. 3).

● To remove filter M, open the grid, open tabs L

and pull out the filter (Fig. 13).

● Leave to dry before refitting it. Be sure that the

grease filter, once blocked with tabs L (Fig. 13)

cover completely the holes of the grid.

Whenever the grease filter is cleaned, the relative

grid should also be cleaned with non-abrasive

detergents.

This filter dissolves cooking odours.

It should be changed every 6-8 months in normal

use.

The carbon filter must never be washed.

To remove the filter, turn it anti-clockwise until it

becomes unhooked and free.

Attention

Failure to observe the rules for cleaning the appli-

ance and changing and cleaning the filters may

cause fires. Therefore, we recommend observing

these instructions.

To clean the outside of the hood use a cloth mois-

tened with denatured alcohol or neutral liquid

detergents. Never use products containing

abrasives.

Fig. 13

● Disconnect the hood from the electricity.

● Open the suction grid

● Replace the damaged part with one of equal

rating. (Max 40 W E 14.).