Andrew James ERA 9HS Manuel de l'utilisateur - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Andrew James ERA 9HS. Andrew James ERA 9HS 12 pages. Traditional/full stone/half stone raclette

Andrew James ERA 9HS Manuel de l'utilisateur
hot gas or electric burners or in a heated oven.
Use of an extension cord with this appliance is not recommended. However if
it is necessary to use an extension cord, ensure that the extension cord is
equal to or greater than the power consumption of the appliance to avoid
overheating of the appliance and extension cord. Do not use any other
appliance on the extension cord. Do not place the extension cord in a
position where it can be pulled on by children or animals or be tripped over.
Always operate the appliance on a smooth, even and stable surface. Do not
place the unit on a hot surface.
Ensure there is adequate space around the appliance whilst operating.
Always remove the plug of the appliance safely. Do not pull on the appliances
cord to remove the appliance plug from the electrical socket.
Never handle or operate the appliance with wet hands.

Specific Safety instructions

Do not touch hot parts of the appliance, always use the handles provided.
Always keep the appliance clean at all times as it comes into contact with
food.
Exercise care when handling oil as oil is highly flammable and can cause
injury.
DO NOT use sharp objects such as knives and forks to cut food on the
appliance as they will damage the grill plate and pans.

First time use

Before using the appliance for the first time, clean the grill plate/stone and
raclette pans thoroughly.
Apply a thin coating of vegetable oil to the cooking surfaces of the grill plate/
stone and the cooking pans, this will help prevent food sticking to the
surfaces and also make the cleaning process easier.
When first using the appliance some light smoke may be produced by the
products heat elements. This is not uncommon and the smoke is completely
harmless. Allow the product to run for ten minutes to make sure that any
residue left on from the manufacturing process is removed.
It is advisable to put the appliance on an easy to clean surface.
4