Atlantic TA1800 Manuel du produit - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel du produit pour {nom_de_la_catégorie} Atlantic TA1800. Atlantic TA1800 17 pages.

To prevent any water from flowing back into the pump when powered off, it is advisable to

install the pump above water level. Tubing must run at a downward slope away from the

compressor. The use of an inline check valve is also recommended to further prevent

moisture damage.

Service & Maintenance

Dust and debris blocking the air intake

may cause abnormal noises or result

in a failure of the pump. Periodic

cleaning of the air intake and

sponge is recommended:

• Unplug the air pump before cleaning

or replacing the air intake sponge.

• Remove the air intake cover, intake

filter and clean with mild detergent.

• Rinse the components thoroughly and

allow to dry completely before reinstalling.

Rubber diaphragms are a wearable part that will need servicing over time. Moisture, heat and

dust will all shorten the life of the diaphragms. Please follow the following steps when

installing replacement diaphragms.

• Remove the top cover housing for the air pump. Loosen the air chamber screws (1) and

remove the outer air chamber (2).

• Loosen the diaphragm nut (3) and remove the diaphragm depressor (4), electrostatic

membrane (5) and the damaged diaphragm (6).

• Install the new diaphragm ensuring that the rubber tabs align properly with the notches

on the inner air chamber.

• Once the diaphragm is seated properly, assemble the components by following the

previous steps in reverse order.

All Typhoon Air Pumps carry a three-year limited warranty. This limited warranty is extended

solely to the original purchaser commencing from the date of original purchase receipt and is

void if any of the following apply:

• The cord has been cut or altered.

• The pump has been misused or abused.

• The pump has been disassembled other than as described in this manual.

• Serial number tag has been removed.

Air Intake Cover

Air Intake

Filter Sponge

Top Cover

Housing