Daikin Altherma 3 GEO EGSAX06DA9W Manuel d'utilisation - Page 5
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Daikin Altherma 3 GEO EGSAX06DA9W. Daikin Altherma 3 GEO EGSAX06DA9W 16 pages.
Également pour Daikin Altherma 3 GEO EGSAX06DA9W : Manuel d'utilisation (16 pages)
Imprimer la page
Item
j
Malfunction
A malfunction occurred.
See
"6.1 To display the help text in case of a
malfunction" on page 11
(1)
If the corresponding operation (for example: space heating)
is not active, the circle is greyed out.
3.2.2
Main menu screen
In the home screen, press
From the main menu, you can access the different setpoint screens
and submenus.
Possible actions on this screen
Go through the list.
Enter the submenu.
Enable/disable breadcrumbs.
Item
Restriction: Only displayed if a malfunction
or
occurs.
Malfunctioning
See
"6.1 To display the help text in case of
a malfunction" on page 11
information.
Restriction: Only displayed if a dedicated
Room
Human Comfort Interface (BRC1HHDA
used as room thermostat) is controlling the
indoor unit.
Set the room temperature.
Shows the applicable symbol for your main
Main zone
zone emitter type.
Set the leaving water temperature for the
main zone.
Additional zone Restriction: Only displayed if there are two
leaving water temperature zones. Shows
the applicable symbol for your additional
zone emitter type.
Set the leaving water temperature for the
additional zone.
Restriction: Only for heating/cooling
Space heating/
models.
cooling
Shows the applicable symbol of your unit.
Put the unit in heating mode or cooling
mode.
Set the domestic hot water tank
Tank
temperature.
Gives access to user settings such as
User settings
holiday mode and quiet mode.
Displays data and information about the
Information
indoor unit.
Restriction: Only for the installer.
Installer
settings
Gives access to advanced settings.
Restriction: Only for the installer.
Commissioning
Perform tests and maintenance.
Change the active user profile.
User profile
EGSAH/X06+10DA9W(G)
Daikin Altherma 3 GEO
4P569812-1 – 2019.02
Description
for more information.
to open the main menu screen.
Description
for more
Item
Turn heating/cooling functionality and
Operation
domestic hot water preparation on or off.
3.2.3
Setpoint screen
The setpoint screen is displayed for screens describing system
components that need a setpoint value.
Example:
▪ Room temperature screen
▪ Main zone screen
▪ Additional zone screen
▪ Tank temperature screen
d
+
c
a2
b2
e
d
d
–
e
a1
b1
Possible actions on this screen
Go through the list of the submenu.
Go to the submenu.
Adjust and automatically apply the desired
temperature.
Item
Minimum temperature limit
Maximum temperature limit
Current temperature
Desired temperature
Submenu
3.2.4
Detailed screen with values
a
b
a
Settings
b
Values
Possible actions on this screen
Go through the list of settings.
Change the value.
Go to the next setting.
Confirm changes and proceed.
3.3
Space heating/cooling control
3.3.1
Setting the space operation mode
To set the space operation mode
1 Go to [4.1]: Space heating/cooling > Operation
mode
3 Operation
Description
Description
a1
Fixed by the unit
a2
Restricted by the installer
b1 Fixed by the unit
b2 Restricted by the installer
c
Measured by the unit
d
Turn the right dial to
increase/decrease.
e
Turn or press the left dial to
go to the submenu.
Operation manual
5