Atlantic Boilers RS TURBOFLOW DN 100 S700+ Manuel d'utilisation et d'entretien - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation et d'entretien pour {nom_de_la_catégorie} Atlantic Boilers RS TURBOFLOW DN 100 S700+. Atlantic Boilers RS TURBOFLOW DN 100 S700+ 18 pages. Plate heat exchangers

Imprimer la page

1.9 - Nameplate

• Stuck to the frame plates.

2 - STORAGE

• Store the heat exchangers in a dry room protected from the weather and maintained at a

temperature between +5°C and +35°C.

• The heat exchangers must be placed on blocks dimensioned and adjusted to ensure adequate

stability and levelness, on a floor protected from caving in. Make sure that they do not touch each other

and that they are not in direct contact with the floor and any walls.

• Protect them from impacts, dust and from the risk of liquid or solid deposits and make sure that

nothing is placed on them.

• Do not remove the protection on the end of the pipes until you are ready to make the hydraulic

connections.

• All unused spare parts must be stored away from damp, light, and dust, and protected from impacts.

• Gaskets and gasketed plates must be stored in appropriate boxes at a temperature of between

10°C and 30°C. Maximum shelf-life: 12 months.

ATLANTIC BOILERS, PO BOX 11, ASHTON UNDER LYNE, OL6 7TR T: 0161 621 5960 E: [email protected] www.atlanticboilers.com

• MANUFACTURING YEAR: Year of manufacture.

• MODEL: Heat exchanger model and product configuration.

• SERIAL No.: Production number, to identify your heat

exchanger.

• DATE: Date of manufacture.

• REF.: Eventual notes and/or different references.

• ALLOWABLE TEMPERATURE MIN. / MAX. (TS):

Minimum and maximum allowable temperatures.

• ALLOWABLE PRESSURE MIN. / MAX. (PS):

Minimum and maximum allowable pressure, in bar.

• TEST PRESSURE (PT): Test pressure, in bar.

• VOLUME: Total capacity of the heat exchan-

ger, in litres.

• PED CLASSIFICATION: Risk category of the

heat exchanger (hazard group and physical

state of the fluid).

• CE MARKING: Only the heat exchangers

classified in PED risk category I, II, III or IV

can be CE marked. The identification number of the Noti-

fied Body will appear near to the CE Mark symbol for heat

exchangers classified in risk category II, III or IV.

• CIRCULATION: 1 indicates the inlet and outlet of the primary

loop. 2 indicates the inlet and outlet of the secondary loop.

• TIGHTENING MEASURE: Minimum and maximum tightening

dimension (d) between the plates, in mm.

• WEIGHT (EMPTY): Empty weight of the heat exchanger,

in kilograms.