DRI Sleeper Eclipse Manuel d'instructions - Page 3
Parcourez en ligne ou téléchargez le pdf Manuel d'instructions pour {nom_de_la_catégorie} DRI Sleeper Eclipse. DRI Sleeper Eclipse 11 pages.
Également pour DRI Sleeper Eclipse : Manuel de démarrage rapide (4 pages)
Imprimer la pageCleaning the DRI Sleeper
Alarm Base: Wipe clean with a damp cloth and some mild detergent or skin
disinfectant. NEVER immerse the alarm base in water or locate it where urine
can enter it.
Urosensor
: Rinse in liquid soap and water and dry well especially between the
™
two black sensing strips.
Note: do not use chlorine-based detergents or cleaners or put the Urosensor
the washing machine or dryer as this will irreparably damage the sensing strips.
1. Place the alarm on a bedside table near your child's bed. Switch the
DRI Sleeper
0 (off) to position 1 (on). The alarm will beep quickly 5 times indicating
it is ready.
2. Remove the Urosensor
touch the black sensing strips with damp fingers the alarm might trigger.
Therefore, it is best to avoid touching the sensing strips when handling the
Urosensor
. If the Urosensor
™
off the alarm and dry the Urosensor
back on.
3. Place the Urosensor
crotch inside a minipad which has been prepared by making a pocket in the
absorbent layers of the material. To do this cut a 25mm (1 inch) slit into the
absorbent layers with a pair of sharp scissors. With the point of the scissors
create a pocket for the Urosensor
Note: the top layer of a minipad is designed to stay dry and if the Urosensor
placed just under the top layer it may not become wet and trigger the alarm when
your child wets. Make sure the Urosensor
is inserted under some layers of absorbent
material so that they will become wet and press
onto the two black sensing strips on top of the
Urosensor
. The two black sensing strips must
™
be wet to trigger the alarm.
How to use your DRI Sleeper
eclipse on by moving the ON/OFF switch from position
®
from the alarm cradle. Please note that if you
™
with the black sensing strips facing your child's
™
eclipse Alarm
®
is accidentally triggered in this way switch
™
which resets it, then switch the alarm
™
to slide into.
™
™
– 3 –
eclipse
®
in
™
is
™