Atlantic Technology IWCB-727 THX Fiche d'information sur le produit - Page 2
Parcourez en ligne ou téléchargez le pdf Fiche d'information sur le produit pour {nom_de_la_catégorie} Atlantic Technology IWCB-727 THX. Atlantic Technology IWCB-727 THX 2 pages. Closed-box in-wall
Boundary Compensation, High Frequency
Energy and Directivity switches
Solid MDF construction
Paintable grille and frame
Carbon fiber 6½" woofers
Punchout for use with IR Receivers*
Atlantic Technology is a registered trademark of Atlantic Technology
International. THX and THX Select2 are trademarks of THX Inc.
Specifications subject to change without notice.
IWCB-727 THX Closed-Box In-Wall
Installation-friendly three piece system
The systems are uniquely easy to mount, since their GFR grille/frame assemblies are sold separately. This means the
installer can run the wire to the speaker locations, then mount and paint the grille/frames to match the room. The
speaker assemblies can be installed at a later time if desired, optimizing the timing of the project.
Specifications
IWCB-727
Type
2½-way M-T-M array
Drivers
Woofer (2) 6 ½" (165mm) Carbon Fiber
Tweeter 1" (25mm) LRT™ soft dome
Frequency Response
75Hz – 20kHz ±3dB
Nominal Impedance
6 Ohms
Crossover Frequency
800Hz, 2.2kHz
Sensitivity
89dB
Recommended Power
10 – 140 Watts RMS
Dimensions (W x H x D)
12 5⁄16 x 21 5⁄8 x 3 7⁄8"
312 x 547 x 100mm
Cutout Dimensions (W x H x D)
11 1⁄8 x 20 3⁄8"
283 x 518mm
Net Weight
13lbs; 5.9kg each
*IR Receiver not included
©2007 Atlantic Technology
Norwood, MA 02062
www.atlantictechnology.com
For ease of installation
and total flexibility/
convenience, the
IWCB-727 uses the
same grill/frame
assembly and New
Construction Bracket
as the IWCB-626 (the
GFR-626 and
IN-NC-626).
343 Vanderbilt Ave.
•
781.762.6300
•
11.07