Electrolux ICON E36WV100FS Manuel d'utilisation et d'entretien Instructions d'installation - Page 10
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation et d'entretien Instructions d'installation pour {nom_de_la_catégorie} Electrolux ICON E36WV100FS. Electrolux ICON E36WV100FS 24 pages. Electrolux ventilation hood installation instructions and use & care guide
Imprimer la page
10
Operation
FUSE REPLACEMENT
ELECTRICAL BOX
TRIM
SUPPORT SCREWS
Figure 3
TRIM SCREWS
FUSE
ELECTRICAL
BOX
SUPPORT
FUSE
BOX
Figure 4
IF LIGHTS FAIL TO OPERATE, DISCONNECT POWER AT THE
SERVICE ENTRANCE. CHECK THE FUSE AND REPLACE IF
NECESSARY.
1 Remove grease filters.
2 Remove (2) trim screws.
3 Remove trim by pulling it forward.
4 Remove the electrical box support and open the fuse box.
5 Unscrew the cap from the fuse holder and remove the fuse.
6 Replace the fuse with the same size and amperage (5 x 20mm,
4 amp, 125 volt).
CAUTION
Use of a fuse greater than 4 amps may damage the transformer.
7 Replace trim screws and reinstall filters.
8 Reconnect power at the service entrance.