Atlantic Technology 422 SB Manuel d'instruction - Page 4
Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Atlantic Technology 422 SB. Atlantic Technology 422 SB 12 pages. Home theater speaker systems
Également pour Atlantic Technology 422 SB : Fiche d'information sur le produit (2 pages), Manuel de révision (3 pages)
Imprimer la page
4
Subwoofer Rear Panel
422 SB Subwoofer Rear Panel
Figure 1
1
2
3
4
Product Serial Number
1
Write this number in the space provided on page 2 for future
reference.
On/Off Switch
2
Use this switch to turn the amplifier completely on or off.
AC Input
3
Use the included power cord to connect your amplifier to a wall
outlet.(pages 5 and 6)
Standby Switch
4
When in ON position,the amplifier will always be on.When in the
AUTO position, the amplifier will be in Automatic Standby Mode.
(pages 5 and 9)
Voltage Select Switch
5
Voltage switch for use in different countries.This switch will be set
when you receive the unit. Change this setting only when you are
sure your application requires it. For US, the switch should be set
to the 110-120V position.
Model 422 SB
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
AVIS: RISQUE DE CHOC ELECTRIQUE-NE PAS OUVRIR
DOUBLE INSULATION - WHEN SERVICING USE ONLY IDENTICAL REPLACEMENT PARTS
2001310
AC
INPUT
AC INPUT 50 / 60Hz 500W MAX
FOR 115V, USE T5AL 250V FUSE
FOR 230V, USE T3.15AL 250V FUSE
40 Hz
NORMAL
NORMAL
RIGHT
CAUTION:
FOR CONTINUED PROTECTION AGAINST FIRE,
REPLACE ONLY WITH SAME TYPE 250V FUSE
Crossover Control
6
An adjustable (40Hz to 140Hz) @ 18dB per octave low-pass cross-
over.(pages 5 and 9)
7
Phase Switch
This switch allows precise acoustic matching with satellite speaker
systems whose output may be phase reversed.(pages 5 and 10)
Crossover Switch
8
When in the NORMAL position, adjustment of the crossover can
be made by the LowPass Control.If being fed a pre-filtered or THX
signal,place the switch at the BYPASS position.(pages 5 and 9)
Low Level Output
9
The outputs allow daisy chaining of multiple subwoofers, or as a
return path back to the processor.(pages 5 and 6)
Low Level Input
10
Use the input to connect to the subwoofer or LFE line out from
your processor/receiver.(pages 5 and 6)
Front Mounted Variable Level Control and Status LED
11
Shown in greater detail on page 9
Model 102, 212 and 422 SB Powered Subwoofer
ON
AUTO
STANDBY
60 Hz
CROSSOVER
FREQUENCY
140 Hz
INVERT
PHASE
BYPASS
CROSSOVER
L / MONO
OUTPUT
INPUT
5
6
7
8
9
10
11