Electrolux Icon E46DD75ESS Manuel d'instructions d'installation - Page 16

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions d'installation pour {nom_de_la_catégorie} Electrolux Icon E46DD75ESS. Electrolux Icon E46DD75ESS 33 pages. External blower assembly for electrolux retractable ventilation systems
Également pour Electrolux Icon E46DD75ESS : Manuel d'instructions d'installation (14 pages), Fiche technique (1 pages), Manuel d'utilisation et d'entretien (12 pages), Catalogue des pièces d'usine (6 pages), Manuel d'utilisation et d'entretien (12 pages), Spécifications et dimensions (2 pages), Manuel d'instructions d'installation (14 pages)

Installation

IMPORT T T T T ANT

IMPOR

The vent must be installed in a vertical orientation. Do not mount the vent on a slant or

angle.

Remove the knockout from the plenum by cutting the tape and metal cross overs to

remove the insert.

Loosely attach the anchoring legs to the left and right sides of the plenum using the

hex nuts provided. Place the vent into the rear of the countertop cutout. Adjust the

anchoring leg height so that the end caps are gently resting on the counter, then

tighten the hex nuts. Secure the anchoring legs to the cabinet/floor with the screws

provided.

IMPORT T T T T ANT

IMPOR

Use duct tape and sheet metal screws to seal the connection between the blower outlet

and duct. Support the duct weight as necessary to ensure sealed joints.

For the side or bottom knockouts use the supplied transition. For the rear knockout

attach a 3 1/4" x 10" duct.

ANT