Electrolux Icon E48DD75ESS Manuel d'instructions d'installation - Page 13

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions d'installation pour {nom_de_la_catégorie} Electrolux Icon E48DD75ESS. Electrolux Icon E48DD75ESS 14 pages. External blower assembly for electrolux retractable ventilation systems
Également pour Electrolux Icon E48DD75ESS : Manuel d'instructions d'installation (33 pages), Fiche technique (1 pages), Manuel d'utilisation et d'entretien (12 pages), Catalogue des pièces d'usine (6 pages), Manuel d'utilisation et d'entretien (12 pages), Spécifications et dimensions (2 pages), Manuel d'instructions d'installation (14 pages)

Imprimer la page
Electrolux Icon E48DD75ESS Manuel d'instructions d'installation
Installing the Blower

BLOWER INSTALLATION

Mount the blower to the wall or roof using screws,
through mounting trim flange.
Verifying Proper Operation
1
Temporarily re-install the remote blower
cover, using 2 screws per side).
2
Turn on the power supply at the circuit
breaker.
3
Refer to the Retractable Vent Installation
Instructions for further instructions on
verifying the proper operation.
IMPOR
IMPORT T T T T ANT
IMPOR
ANT
ANT
ANT
IMPOR
IMPOR
ANT
If the remote blower does not operate properly, follow these troubleshooting steps:
1. Verify that power is being supplied to the Retractable Vent and the remote
blower.
2. Check the electrical connections to ensure that the installation has been
completed correctly.
3. Repeat the above test.
4. If the appliance still does not work, contact Electrolux at 1-877-4Electrolux. Do
not attempt to repair the appliance yourself. Electrolux is not responsible for
service required to correct a faulty installation.
Wiring of Retractable Ventilation System
(E30DD75ESS, E36DD75ESS, E46DD75ESS
and E48DD75ESS)
Vent
GRN
GRN
Gnd
Gnd
GRN
WHT
N1
WHT
BLK
L1
BLK
N2
WHT
L2
BLK
Blower
5304444802
L2
N2
Gnd
Figure 7
13
120VAC, 60Hz, 15A
Supply power from
dedicated circuit breaker
BLK
WHT
GRN