Atlantic Technology SB-800 Manuel d'instruction - Page 3
Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Atlantic Technology SB-800. Atlantic Technology SB-800 4 pages. High performance powered subwoofer
Imprimer la page
Instruction Manual
SB-800 Subwoofer Rear Panel
Figure 1
LOW-PASS
80
55
11
10
220-240V
12
FOR 110-120VAC, USE T1.0AL 250V FUSE
FOR 220-240VAC, USE T1.6AL 250V FUSE
Bass Level Control
1
Use this control to set the level of bass desired
Status LED
2
This will be green for "on" condition, amber for "standby"
Standby Switch
3
When in ON position, the amplifier will always be on. When in the
AUTO position, the amplifier will be in Automatic Standby Mode.
4
Low-Pass Control
An adjustable (55Hz to 200Hz) @ 18dB per octave low-pass
crossover.
Phase Switch
5
This switch allows precise acoustic matching with satellite speaker
systems whose output may be phase reversed. Try in both posi-
tions — use the position that results in the strongest bass output.
Low-Pass Switch
6
When in the LOW-PASS position, adjustment of the crossover can
be made by the Crossover Control. If being fed a pre-filtered or THX
signal, place the switch at the BYPASS position.
4
3
5
2
STANDBY
PHASE
STATUS
140
ON
AUTO
160
200
0
180
MIN
LOW-PASS
BYPASS
ON
SERIAL
MODEL
OFF
SB-800-BLK Powered Subwoofer
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK.
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
110-120V
AVIS: RISQUE DE CHOC ELECTRIQUE-NE PAS OUVRIR
FOR CONTINUED PROTECTION AGAINST RISK OF FIRE,
REPLACE ONLY WITH SAME TYPE AND RATING OF FUSE
AC INPUT
USE ONLY IDENTICAL REPLACEMENT PARTS
50-60Hz
110W MAX
1
8
7
LEVEL
INPUT
OUTPUT
L / MONO
MAX
RIGHT
SB800BJRWWY80100
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
DOUBLE INSULATION - WHEN SERVICING,
Low Level Output
7
The outputs allow daisy chaining of multiple subwoofers, or as a
return path back to the processor.
Low Level Input
8
Use the input to connect to the subwoofer or LFE line out from
your processor/receiver.
Product Serial Number
9
Write this number in the space provided on page 2 for future
reference.
Voltage Select Switch
10
Voltage switch for use in different countries. This switch will be set
when you receive the unit. Change this setting only when you are
sure your application requires it. For US, the switch should be set
to the 115V position.
On/Off Switch
11
Use this switch to turn the amplifier completely on or off.
AC Input
12
Use the included power cord to connect your amplifier to a wall
outlet.
6
9
3