Electrolux ICON RH36WC60GS Manuel d'installation, d'utilisation et d'entretien - Page 12

Parcourez en ligne ou téléchargez le pdf Manuel d'installation, d'utilisation et d'entretien pour {nom_de_la_catégorie} Electrolux ICON RH36WC60GS. Electrolux ICON RH36WC60GS 21 pages. 30” et 36” hotte aspirante
Également pour Electrolux ICON RH36WC60GS : Spécifications (2 pages), Catalogue des pièces d'usine (4 pages), Manuel d'installation, d'utilisation et d'entretien (22 pages), Manuel d'installation, d'utilisation et d'entretien (22 pages), Manuel d'utilisation et d'entretien (44 pages), (anglais) Installation, Use and Care Guide (22 pages), (French) Manual D’installation, Utilisation Et D’entretien (22 pages)

Imprimer la page
Electrolux ICON RH36WC60GS Manuel d'installation, d'utilisation et d'entretien
Installing the hood
12
12
12
12
12

Connecting the ductwork

Connecting the ductwork
Connecting the ductwork
Connecting the ductwork
Connecting the ductwork
• Install ductwork, making connections in the
direction of airflow as illustrated.
• Push duct over the exhaust outlet.
• Wrap all duct joints and the flange connections
with duct tape for an airtight seal.
• Make the same connection in the wall or ceiling
vent exit.
Duct tape
over seam
Air deflector installation
Air deflector installation
Air deflector installation
Air deflector installation
Air deflector installation
(Recir
(Recir
(Recir
(Recirculating accessories)
(Recir
• Assemble the air deflector with the duct cover
Airflow
• Measure from the bottom of the air deflector to
• Cut the duct at the measured size.
• Uninstall the air deflector removing the 4
• Slip the duct onto the bottom of the deflector.
• Place the assembled deflector and duct over the
• Assemble the air deflector to the duct cover
culating accessories)
culating accessories)
culating accessories)
culating accessories)
bracket with 4 assembly screws provided as
shown.
the bottom of the hood outlet, as shown.
Dimension to measure
assembly screws.
exhaust outlet from the hood.
bracket with 4 assembly screws provided as
shown.