Atlantic Technology 251 LR Manuel d'instruction - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Atlantic Technology 251 LR. Atlantic Technology 251 LR 8 pages. System 250 series high performance loudspeaker system

Imprimer la page

Models 251 LR, 253 C, and 254 SR

Figure 1:

Speaker Wiring

Terminals

the speaker. Look carefully at the wires you are using and note that one of the wires in

each pair is marked by either a different color, printing, ridges, or a thread intertwined

with the wire strands. Conventionally, the marked wire is connected to the red (+)

terminal.

Figure 2:

Typical wiring

diagram for

speakers in a

home theater.

Whether your are connecting a complete System 250, or adding one speaker compo-

nent to your present system, the wiring should look like the diagram in Figure 2. Before

turning on the amplifier, be certain that no stray wire strands are touching across the

two terminals as this might damage your amplifier.

Finally, check the polarity of your front speakers by listening to some music. If the

sound seems hollow, spread out and has weak bass, recheck your connections for proper

polarity and reverse the connections if necessary.

You can connect your System 250 speakers by using

spade lugs or "banana" connectors, or by removing 1/2"

of insulation from each wire end, twisting the strands of

wire together, placing the wire through one of the post

holes and screwing down the nut tightly.

It is important to observe polarity while making speaker

connections: red (+) terminals on the amplifier to red (+)

on the speaker, black (-) on the amplifier to black (-) on

tlantic

TECHNOLOGY