AirTech AQ-40B Manuel de l'utilisateur - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} AirTech AQ-40B. AirTech AQ-40B 6 pages. Fm handheld transceiver

Imprimer la page

Unpacking

Unpack and check that all items have been enclosed.
Packing contents: ±radio ↑antenna →battery pack
(1,650 mAH) ↓belt clip °hand strap ±charger "user's manual
3
Optional
Accessories External speaker/microphone
1. Additional battery pack

Getting Ready

1.
Installation and Removal, Belt Clip
Installation: Align the belt clip with the plastic slots of
the battery pack. Slide the belt clip onto the battery pack,
pushing firmly until a click heard.
Removal: Hold up the belt clip release tab with a
fingernail or a coin (or like instrument). While holding up
the release tab, slide the belt clip out and away from the
battery pack.
2.
Installation and Removal, Battery Pack
Installation: Turn off the transceiver. Hold the
transceiver with the back of the unit
facing up. Place the battery pack against
the back of the transceiver so that the
tabs on the transceiver engage the four
openings in the battery pack. Slide the
battery pack toward the top of the
transceiver until a click heard.
Removal: Turn off the transceiver. Hold the radio with
the back of the unit facing up. With the thumbnail of your
other hand slide the latch lever down. While holding the
latch lever down, slide the battery pack down toward the
bottom of the
Separate the
the transceiver.
3.
Installation
Rotate the
until it is seated
*. Before starting
sure the battery is fully charged.
4
transceiver.
battery pack from
Antenna
antenna clockwise
firmly.
operation,
make