Atlantic Technology SA-380 Manuel d'instruction - Page 5
Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Atlantic Technology SA-380. Atlantic Technology SA-380 12 pages. Inwall subwoofer system thx ultra mono subwoofer amplifier
Imprimer la page
Instruction Manual
Amplifier Front Panel
Figure 4
1
3-Color LED Status Indicator
1
The front panel LED indicator has three modes:
Amber: Indicates the SA-380 is connected to an AC power source
and the rear-panel Main Power switch is turned on. When the
indicator is amber, the unit is in the Standby mode and is ready
to turn on when a control signal is received at the trigger jack or
from the music sense circuitry.
Green: Indicates the SA-380 is on and operational.
Red: Indicates the SA-380 is in Protect mode. Turn the unit off
and check for the source of the condition that caused the overload.
This may be a shorted speaker lead or other similar condition. In
the event of repeated appearance of the red LED you may have a
chronic system failure with either the SA-380 or another compo-
nent in your system. In this case disconnect the SA-380 from AC
power and the rest of your system and consult Atlantic Technolo-
gies Customer Service Department for assistance.
BASS LEVEL
PHASE
0
180
MIN
MAX
REF
2
3
BASS LEVEL control
2
Sets the volume level of the connected subwoofer. A detent setting
is provided for THX/REF operation.
PHASE control
3
Sets correct subwoofer phase (0° or 180°) to best match your sat-
ellite speakers and room.
Amplifier Front Panel
5
SA-380 Servo Controlled Subwoofer Amplifier