Atlantic Ultraviolet G48HO Manuel du propriétaire - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Atlantic Ultraviolet G48HO. Atlantic Ultraviolet G48HO 20 pages. Germicidal ultraviolet portable area sanitizer

Imprimer la page

Atlantic Ultraviolet G48HO Manuel du propriétaire

PRODUCT APPLICATIONS

onstruCtion

The Sanidyne

Plus Germicidal Ultraviolet Portable Area Sanitizer consists of:

• STER-L-RAY

High Output Germicidal Ultraviolet Lamps: Deliver ultraviolet energy at the specific wavelength of 254

nanometers (nm). This wavelength is highly effective against microbes including virus, bacteria and mold spores. Germicidal

ultraviolet rays are harmful to eyes and skin, avoid exposure of direct or reflected germicidal ultraviolet rays without approved

ultraviolet blocking face shield and protective covering (such as gloves, long sleeves with no gaps between cuff and gloves).

• Audible Exit Warning Alarm: To alert area that the lamps will be powered on in one minute and thirty seconds after the start

button is pressed or to indicate intruder is in Operation Area.

• Elapsed Time Indicator: A non-resettable display of the operating hours. Useful for scheduling and recording maintenance

and lamp replacement.

• Hand-Held Remote Controller: Provides easy operation of Sanidyne

controls treatment times and alerts operator with an audible alarm if an intruder enters Operation Area.

• Keypad Controller: Provides easy operation of Sanidyne

thirty seconds) to leave the Operation Area before treatment begins.

• Intruder Sensors: Delay treatment if the Operation Area is inhabited. Additionally if sensors detect an intruder with less than

30 seconds left before lamps operate, the countdown time will automatically restore back to 30 seconds until area is cleared.

• Four Wheels with Locking Casters: Make moving Sanidyne

• Power Cord: For 120v AC 50/60Hz single-phase standard household current, a NEMA 5-15, three-prong plug is provided for

a properly grounded outlet. 230v AC 50/60Hz models use a CEE 7/7 (Schuko type) plug. (Consult factory for other plug types).

• Stainless Steel Lamp Guard Assembly: Protects lamps from damage during normal operation.

• Stainless Steel Construction: All electronics and wiring are housed in an enclosure constructed of stainless steel, providing

strength and durability in order to withstand most harsh environments.

• Sanidyne

Plus will operate between 120v 50/60Hz and 250v 50/60Hz.

rinCiPle of

Peration

The Sanidyne

Plus design has been carefully conceived to provide direct germicidal ultraviolet exposure for air and surface

disinfection in unoccupied areas to disinfect and prevent areas and surfaces from microorganisms. The ultraviolet disinfection

dosage is a function of time and the intensity, of the ultraviolet radiation to which the air and surrounding surfaces are exposed.

NOTE: The Sanidyne

Plus should be used as a supplement to your facility's cleaning and disinfection protocols, not as a

replacement. Follow your facility's cleaning and disinfection protocols before using the Sanidyne

No special room preparation is required prior to treating a room or area with the Sanidyne

surfaces must be directly exposed to the UV rays. These rays will not penetrate materials like cloth, paper or ordinary glass,

therefore, it is important to remove items from the direct line of sight that would block or shield the rays from other surfaces.

The Sanidyne

Plus does not generate any harmful byproducts, nor does it leave any residual substances.

It is the user's responsibility to determine and validate the suitability of the equipment for use in system

or process. No warranty or representation is made by the manufacturer with respect to suitability or performance of this

equipment or to the results that may be expected from its use.

Indoor Use Only – The equipment must be sheltered from exposure to the elements and extremes in

temperature. Temperature range: 40 °F to 95 °F. The user should periodically inspect, clean as necessary and confirm the

presence and good legibility of the Product safety labels. Contact the factory for replacement labels in the event that any of

the labeling is missing or illegible.

The UV Treatment Results achieved are subject to variations in application conditions, it is recommended

that culture tests be performed to confirm desired outcomes.

imitations

• Safety procedures MUST be implemented to prevent ultraviolet exposure of occupants to direct or reflected ultraviolet rays.

Exposure to germicidal ultraviolet rays will result in the irritation of the eyes and reddening of the skin.

•

Personal protection equipment is required when entering the irradiated space with the germicidal lamp(s)

operating. Personal protection equipment includes skin and eye protection such as gloves, long sleeves

with no gaps between cuff and gloves, and an ultraviolet blocking face shield (included with the purchase

of the Sanidyne

Plus and allows the operator a period of time (one minute and

Plus).

Plus from a safe distance, displays lamp operation,

Plus easily accomplished for location changes.

Plus — however, target

Plus.