Electrolux SL series Utilisation - Page 34

Parcourez en ligne ou téléchargez le pdf Utilisation pour {nom_de_la_catégorie} Electrolux SL series. Electrolux SL series 45 pages.

MOUNTING INSTRUCTIONS

Mount the hood as shown in the mounting instruction booklet.

WARNING! The fixing material (screws/plugs) that are delivered with the hood are

suitable only for solid concrete ceilings and walls. The person who is mounting the

hood should make sure that the fixing elements delivered with the hoods are right and

suitable for the walls and ceiling he finds. The manufacturer declines any

responsibility for damages caused by incorrect mounting.

DISMANTLING AND RE-POSITIONING OF THE GREASE FILTERS

Switch the lights off and wait till they have completely cooled down.

Follow the steps as shown in Figures.

To dismantle the grease filter press the handle and, pull it downwards.

To re-position the grease filter insert them oblique in the opening, lift them in the front side and

then fix them in the back side.

FITTING AND REMOVAL OF EVENTUAL CARBON FILTERS

If you wish to use the hood as a filtering hood, it is necessary to fit the carbon filters.

The carbon filters ARE OPTIONAL, and can be bought separately.

2 kinds of carbon filters are available:

•

LONG LIFE Carbon filters that can be regenerated. The instructions are given with the

filters.

•

Standard Carbon filters that cannot be regenerated. The instructions you find in Figures

The pipe must be heat, flame and corrosionproof. The producer strongly advises against the

use of reducers or pipes with smaller diameter to the hood outlet pipe. Also flexible aluminium

pipes are not recommended because performance is strongly diminished.

The end part of the pipe, on the outside of the hole on the wall, must be of such a shape to

avoid rain, gusts of wind or other foreign bodies getting into the pipe.

Should there be any doubt, contact anyone specialising in the installation of gas or ventilation

system.