Bosch 2 Manuel d'instruction - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Bosch 2. Bosch 2 12 pages. Mini blender
Également pour Bosch 2 : Manuel d'installation rapide (16 pages), Manuel d'installation et d'utilisation (18 pages), Manuel d'instructions original (13 pages), Manuel d'instructions original (22 pages), Manuel d'instruction (32 pages), Manuel de l'utilisateur (28 pages), Manuel de l'utilisateur et instructions d'installation (16 pages), Manuel d'instruction (42 pages), Manuel d'utilisation (8 pages), Manuel d'instruction (8 pages), Manuel de démarrage rapide (2 pages), Manuel de démarrage rapide (9 pages), Manuel d'instruction et instructions d'installation (36 pages), Manuel de l'utilisateur et instructions d'installation (48 pages), Manuel d'utilisation (26 pages), Manuel de référence rapide (2 pages), Manuel de l'utilisateur et instructions d'installation (24 pages), Manuel d'instruction (42 pages), Informations pour l'utilisation (28 pages), Manuel de l'utilisateur (40 pages), Manuel de l'utilisateur et instructions d'installation (35 pages), Manuel de l'utilisateur (24 pages)

Imprimer la page

3Trouble shooting

M alfunctions often have simple explanations. Please

T r o u b l e s h o o t i n g

read the following notes before calling the after-sales

service.

Warning – Risk of electric shock!

Incorrect repairs are dangerous. Repairs may only be

carried out and damaged power cables replaced by

one of our trained after-sales technicians. If the

appliance is defective, unplug the appliance from the

mains or switch off the circuit breaker in the fuse box.

Contact the after-sales service.

Fault table

Problem

Possible cause

The appliance

The plug is not

does not work

plugged into the

mains

Power cut

The fuse is faulty

The lighting does

The LED lights

not work.

are defective.

--------

Replacing the LED lights

Warning – Risk of electric shock!

When changing the bulbs, the bulb socket contacts are

live. Before changing the bulb, unplug the appliance

from the mains or switch off the circuit breaker in the

fuse box.

Warning – Risk of injury!

The light emitted by LED lights is very dazzling, and can

damage the eyes (risk group 1). Do not look directly

into the switched on LED lights for longer than

100 seconds.

Important! Only use bulbs of the same type and

wattage.

Disconnect the appliance from the power supply.

Remove the metal grease filter.

Unscrew the bulb and replace it with a bulb of the

same type.

Fit the metal grease filters.

Plug in the mains plug and switch the circuit breaker

back on.

Solution

Connect the appliance to the

power supply

Check whether other kitchen

appliances are working

Check in the fuse box to make

sure that the fuse for the appli-

ance is in working order

You can read about this in the

section entitled "Replacing the

LED lights".

4Customer service

W hen calling us, please give the product number (E

C u s t o m e r s e r v i c e

no.) and the production number (FD no.) so that we can

provide you with the correct advice. The rating plate

with these numbers can be found inside the appliance

(remove the metal mesh grease filter to gain access).

You can make a note of the numbers of your appliance

and the telephone number of the after-sales service in

the space below to save time should it be required.

E no.

After-sales serviceO

Please be aware that a visit by an after-sales engineer

will be charged if a problem turns out to be the result of

operator error, even during the warranty period.

Please find the contact data of all countries in the

enclosed customer service list.

To book an engineer visit and product advice

0344 892 8979

Calls charged at local or mobile rate.

01450 2655

0.03 € per minute at peak. Off peak 0.0088 €

per minute.

Rely on the professionalism of the manufacturer. You

can therefore be sure that the repair is carried out by

trained service technicians who carry original spare

parts for your appliances.

Trouble shooting

FD no.