Electrolux WHGL9062CN Manuel de l'utilisateur - Page 7
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Electrolux WHGL9062CN. Electrolux WHGL9062CN 28 pages.
Imprimer la page
4. CONTROLS
A
B
C
Button Function
A
Brief pressure: Activates/Deactivates the button pad functions.
All the buttons light up white.
If the motor is ON, it turns the motor off and leaves the button
pad functions active.
If the motor is OFF, the button pad remains active for 1 minute.
With the motor turned Off (by pressing and holding button for
approximately 3 seconds): activates/deactivates the keyboard
lock. For example, to clean the glass without activating any
function.
Activates speed one.
MOTOR OFF
B
Keeping the button pressed for approximately 3 seconds
activates/deactivates the H2H function and the remote control.
C
Activates speed two.
D
Activates speed three.
E
Activates Intensive 1 speed for 10 minutes. At the end of
this time the system will automatically return to the speed set
before. It is disabled by changing speed or pressing button A.
Press and hold for approximately 3 seconds to Enable / Disable
the Activated Charcoal Filter alarm (Motor = Off).
S
Activates Intensive 2 speed for 5 minutes. At the end of this
time the system will automatically return to the speed set
before. It is disabled by changing speed or pressing button A.
F
Activates BREEZE speed for 60 minutes. At the end of this
time the motor switches off. It is disabled by changing speed
or pressing button A.
G
Filter alarm button.
This button is normal off. It is only displayed when the filter
alarm is triggered. The alarm can be reset by pressing and
holding this button for approximately 3 seconds (Motor = Off).
H
H2H indicator button.
This button is normally off. It is only displayed when the hob
is connected to the Hood.
I
Press briefly: Turns the lighting system on and off at maxi-
mum intensity.
Press and hold to change the lighting intensity up or down.
5. LIGHTING
• For replacement contact techni-
cal support ("To purchase contact
technical support").
D
E
S
F
G
H
Display
-
Active: All the buttons flash.
Inactive: Buttons remain lit for 1 minute.
The button turns from white to red.
ON: button C flashes 5 times.
OFF: button D flashes 5 times.
The button turns from white to red.
The button turns from white to red.
The button turns from white to red.
H flashes 5 times.
The button turns from white to red.
The button turns from white to red.
Button H fixed (30 seconds): indicates
the need to wash the metal grease filters.
The alarm is triggered after the Hood has
been in operation for 40 working hours.
Button H flashing (30 seconds): indicates
the need to change the activated char-
coal filters, and also to wash the metal
grease filters. The alarm is triggered after
the Hood has been in operation for 160
working hours.
The button turns red.
-
-
ENGLISH
7
I