Atlantis Land A02-F8P Manuel de l'utilisateur - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Atlantis Land A02-F8P. Atlantis Land A02-F8P 12 pages. 5/8-port 10/100mbps fast ethernet desktop switch

Imprimer la page

1.7 Connecting The Switch

If the attached device does not support auto-negotiation or has auto-negotiation disabled, an auto-

sensing process is initiated to select the speed and set the duplex mode to half-duplex.

5/8-Port Fast Ethernet Desktop Switch

Power is supplied through an external DC

power

adapter.

specification section for information about

the DC power input voltage.

switch does not include a power switch,

plugging its power adapter into a power

outlet will immediately power it on.

With the Auto-MDI function, you just need

to plug-in the network cable to the hub

directly and no need to care if the end node is

NIC (Network Interface Card) or switches

and hubs.

A PC can be connected to the Switch via a

two-pair Category 3, 4, 5 UTP/STP cables.

The PC (equipped with a RJ-45 10/100Mbps

phone jack) should be connected to any port

of the Switch.

The LED indicators for PC connection

dependent on the LAN card capabilities. If

LED indicators are not light after making a

proper connection, check the PC LAN card,

the

cable,

the

Switch

connections.

After plugging the selected cable to a specific

port, the system uses auto-negotiation to

determine the transmission mode for any new

twisted-pair connection:

Check

the

technical

Since the

conditions

and