ADVANCED Network Devices IPSIGN-O Dépliant d'installation - Page 2

Parcourez en ligne ou téléchargez le pdf Dépliant d'installation pour {nom_de_la_catégorie} ADVANCED Network Devices IPSIGN-O. ADVANCED Network Devices IPSIGN-O 2 pages. Outdoor ip sign

Imprimer la page

BOOT SEQUENCE

When first powered, if properly installed, the device should boot, and then display the time as follows:

PARTS INCLUDED

1 – Outdoor IP Sign (IPSIGN-O) with 7-foot AC cable

2 – Additional wall brackets

1 – Water-resistant network cable housing (six-piece assembly) to securely connect a network cable to the device

TROUBLESHOOTING AND ADDITIONAL RESOURCES

Complete Support Site with User Guides and Help:

Product Registration:

Customer Feedback Survey:

AND Limited Warranty:

AND Legal Disclaimer:

The first screen you will see. This screen should appear within 1-2

seconds of powering on the device.

Indicates the current firmware equipped with the device.

Indicates the network MAC address of the device (configured at

the factory).

Indicates that the device is looking for a DHCP server, among

other things.

possible network problem (cable, switch, ISP, DHCP, etc.)

Indicates the IP address of the device. DHCP assigns this network-

specific address. Otherwise, the static address will appear if

configured as such.

Once all initialization completes, the time will display.

colon displays, it cannot find the time. Check the NTP server

settings, and check that the internet connection is working.

Advanced Network Devices • 3820 Ventura Dr. Arlington Hts. IL 60004 • Fax: 847-359-5418

Support:

[email protected]

Outdoor IP Sign (IPSIGN-O)

If the boot process hangs in this state, check for a

http://www.anetdsupport.com/

http://www.anetdsupport.com/register

http://www.anetdsupport.com/survey

http://www.anetd.com/warranty

http://www.anetd.com/legal

• 847-463-2237 •

www.anetdsupport.com

•

Version 1.2

7/16/18

Installation

If just a