Atlas AHSUB15S Spécifications

Parcourez en ligne ou téléchargez le pdf Spécifications pour {nom_de_la_catégorie} Atlas AHSUB15S. Atlas AHSUB15S 3 pages. 15" ah series stadium subwoofer system
Également pour Atlas AHSUB15S : Brochure (10 pages)

Imprimer la page

15" AH Series Stadium Subwoofer System

Features

•

I mpressive efﬁ ciency rating of 103 dB 1 W/1M makes the

AHSUB15S a perfect choice for low frequency augmentation of high

energy music playback at sporting events.

•

W eather & rodent resistant.

• R ear ﬁ ring woofer cavity and mesh screen over the

enclosure front to protect the speaker from weather

and/or rodent damage.

• W eather resistant connection via a convenient recessed terminal

block located on back of loudspeaker

•

S ecure surface mounting or suspension installation via the integral

forged eyebolts.

•

500 watts power handling

•

Maximum output of 127 dB (Rated Power @ 1 M)

1601 JACK MCKAY BLVD. ENNIS, TEXAS 75119 U.S.A.

TELEPHONE: (800) 876-3333

FAX (800) 765-3435

AHSUB15S

Applications

The Atlas Sound AHSUB15S subwoofer system features high output

and amazing low frequency response for indoor and outdoor applications

including football stadiums, sports arenas, baseball fields, and large audi-

toriums.

Unit features an efficient low frequency woofer loaded into a durable,

weather resistant, rear firing enclosure.

Installation

Ground Installation (Recommended)

Excellent results may be achieved by mounting the AHSUB15S under

bleacher seating. Electronic delay is suggested to approximate time

alignment of full range speakers with subwoofer(s) to the listener

locations.

Optional AHSUBSTAND allows easy installation of the AHSUB15S

under bleacher seating or other areas where concrete slab mounting is

possible. Stand provides secure mounting of the AHSUB15S in a down

firing configuration to maximize output performance while helping to

prevent theft and weather damage. Holes are provided on the bracket

feet for anchor points when mounting on concrete slab and additional

holes are located on the frame to allow the AHSUB15S to be attached to

the frame via chain or cable for optimal security.

Overhead Installation

Remember that wind will add considerable torque to the point of

attachment. The mounting surface the speaker is being attached to

should be able to handle five or more times the weight of the AH

speaker (7x recommended for locations subject to high wind forces).

The installer must ensure that the surface is capable of safely and

securely supporting the load. The hardware employed must be safely

and securely attached both to the loudspeaker and the surface in

question. A general rule for soft surface installations (wood beams) is to

multiply the corresponding working load limit by 75%: the result will be

an approximate working load strength.

AtlasSound.com

AHSUB15S

Mounted

on Optional

AHSUBSTAND

1/3