Atlas MA40G Manuel du propriétaire - Page 6
Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Atlas MA40G. Atlas MA40G 12 pages. Mixer amplifiers
Imprimer la page
4. Input 1 Gain
Input 1 level control potentiometer varies the amplitude of the signal fed into the amplifier. Turn clockwise to increase and
counter-clockwise to decrease the signal level.
5. Input 2 Gain
Input 2 level control potentiometer varies the amplitude of the signal fed into the amplifier. Turn clockwise to increase and
counter-clockwise to decrease the signal level.
6. Input 3 Gain
Input 3 level control potentiometet varies the amplitude of the signal fed into the amplifier. Turn clockwise to increase and
counter-clockwise to decrease the signal level.
Rear Panel Description
Input 1
Balanced Input
2
1. Multi Function Dipswitch
Understanding the functionality of the dipswitches is key to maximizing the versatility of the MA40G or MA60G.
SWITCH 1 - Input 2 Mute - When "ON", Input 2 signals will be muted if a signal is present on Input 1 (Refer to VOX Sensitivity
Control), or if a contact closure is present on the remote mute terminals.
SWITCH 2 - Input 3 Mute - When "ON", Input 3 signals will be muted upon a signal present on Input 1 (Refer to VOX Sensitivity
Control), or if a contact closure is present on the remote mute terminals.
SWITCH 3 - Phantom Power - When "ON", applies Phantom Power 24VDC to Input 1 terminals for condenser type microphones.
Note: Only use this feature if you are using condenser microphones, otherwise leave in the "OFF" position.
SWITCH 4 - Input 1 - When in the "MIC" position, Input 1 will accept microphone level signals; when in the
Input 1 will accept line level or telephone signals.
2. Input 1
Balanced mic or line level signals connect to the (+), (–), and (G) terminals. Refer to the chart on this page for the following setting.
Switch 4, labeled Input 1, must be set to the proper position for mic or line level. If you are connecting an unbalanced line level
input, tie (short) the (G) and (–) terminals together. If transformer isolation is required for Input 1, contact Atlas Sound for details.
3. Input 2
Input 2 consists of stereo summing inputs, suitable for connection to the output of CD/DVD players, etc.
AtlasSound.com
MA40G / MA60G
Mixer Amplifier
Power
Limit
Signal
Input 2
Input 3
L
R
Unbalanced
3
4
1
ON
OFF
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Specifications are subject to change without notice.
Input 1
Input 2
Level
Level
On
Off
Input 2 Mute
On
Off
Input 3 Mute
AtlasSound.com
On
Off
Phantom Power
Mic
Line
Input 1
Remote
Mute
0
10
VOX
Sense
8
5
Input 2 Mute
Input 3 Mute
Phantom Power
Input 1
Telephone: 800.876.3333 • Fax: 800.765.3435
– 6 –
Owner's Manual
Input 3
Level
1601 Jack McKay Blvd
Ennis, TX 75119
800.876.3333
40 Watts
70.7V/100V
Speaker Out
100V -240V ~ 50Hz/60Hz 750mA
6
On
Off
On
Off
On
Off
Mic
Line
"Line/Tel" position,
7