Atlas A-line Acoustic ELI2K-B Manuel du propriétaire - Page 4
Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Atlas A-line Acoustic ELI2K-B. Atlas A-line Acoustic ELI2K-B 12 pages. Small format line array system
Imprimer la pageELI2K-B Line Array System
WARNING
•
To prevent electric shock, do not remove the product cover as there are high voltage components inside. Refer all servicing to
Atlas Sound.
•
Should any of the following irregularities occur during use, immediately switch off the power, disconnect the power cord from the
AC outlet and contact Atlas Sound. Do not to attempt to continue operation with the product as this may cause fire or electric shock:
•
Smoke or strange smell coming from the unit.
•
If the product falls or the case is damaged.
•
If water or any metallic objects falls into the product.
•
If the power supply cord is damaged in any way.
•
If the unit is malfunctioning.
•
Do not insert or drop metallic objects or flammable materials into the ventilation holes of the product's cover, as this may result in
electric shock or fire.
•
Never operate this product or touch the power supply cord during an electrical storm, electric shock may result.
•
Never exceed the power rating on the product when connecting equipment. Fire and/or property damage may result.
•
Operate the product only with the voltage specified on the unit. Fire and/or electric shock may result if a higher voltage is used.
•
Do not modify, kink, or cut the power cord. Do not place the power cord in close proximity to heaters and do not place heavy objects
on the power cord, including the product itself, doing so may result in fire or electrical shock.
•
Ensure that the safety ground terminal is connected to a proper ground. Never connect the ground to a gas pipe as a catastrophic
disaster may result.
•
Be sure the installation of the product is stable, avoid slanted surfaces as the product may fall and cause injury or property damage.
CAUTION
•
Always make sure your system is set up on a level suface and will not fall over.
•
Always assure power is Off to amplifiers before making any connections. Assure that all electrical equipment is properly grounded.
•
Suspension or "flying" speaker systems requires training and expertise. Improper rigging of a flying speaker may result in injury,
death, equipment damage, and legal liability. Installation must be carried out by fully qualified installers, in accordance with all
required safety codes and standards at the place of installation.
A 5:1 design factor is a generally accepted minimum standard. However, legal requirements for overhead suspension vary by
municipality, please consult your local safety standards office before installing any product. We also recommend that you
thoroughly check any laws and bylaws prior to installation.
Loudspeakers flown in theaters, nightclubs, conference centers, or other places of work and entertainment must be provided with
an independent, correctly rated and securely attached secondary safety, in addition to the principle suspension point(s).
If you lack the skills, training, and proper ancillary equipment to fly a speaker system, do not attempt to do so.
For additional information regarding the suspension of loudspeakers or to purchase rigging materials, please contact our friends at
Adaptive Technologies Group,1635 E. Burnett St. Signal Hills, CA 90755 • www.adapttechgroup.com • Telephone (562) 424-1100
CAUTION
•
Never place heavy objects on the product, causing it to fall and/or break, resulting in personal injury and property damage. In
addition, the product itself may fall and cause injury and property damage.
•
All professional loudspeaker systems are capable of generating very high sound pressure levels. Use care with placement and
operation to avoid exposure to excessive levels that can cause permanent hearing damage.
•
Ensure that the power supply plug is securely plugged into the wall outlet. Never allow dust to accumulate on the power plug or
inside the wall outlet.
•
When cleaning the unit or the unit is not to be operated for an extended period, unplug the power cord from the wall.
AtlasSound.com
When The Device Is In Use
When Installing The Product
When The Product Is In Use
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: 800.876.3333 • Fax: 800.765.3435
– 4 –
Specifications are subject to change without notice.
Owner's Manual