Atlas A-line Acoustic ELI2K-B Manuel du propriétaire - Page 8
Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Atlas A-line Acoustic ELI2K-B. Atlas A-line Acoustic ELI2K-B 12 pages. Small format line array system
Imprimer la pageELI2K-B Line Array System
Troubleshooting
Issue 1 - Green Signal light on but there is no sound
Possible Cause - Speaker wiring
Action Needed - Connect cable and make sure NL4 is locked in place (¼ turn clockwise).
Possible Cause - Mute switch is engaged
Action Needed - Disengage the Mute switch.
Issue 2 - Low sound or audio output.
Possible Cause - Input cable may have a short or the cable may be bad.
Action Needed - Cable must be balanced, 3 pin connection.
Possible Cause - Check input cable to be sure it is a balanced 3 pin XLR.
Action Needed - Replace cable as need making sure there is continuty on all 3 pins.
Possible Cause - Check input in is connect to the input not loop out.
Action Needed - Reconnect cable to correct input.
Issue 3 - Sound is intermittent
Possible Cause - Check cable integrity.
Action Needed - Replace damaged or crimped cables as needed.
Possible Cause - Amplifier operating outside normal performance range.
Action Needed - Decrease source output level.
Issue 4 - No Low end to system, woofer not working
Possible Cause - Mute switch for Channel #1 is engaged.
Action Needed - Disengage mute switch.
Issue 5 - No top end to system, arrays not working.
Possible Cause - Mute switch for Channel #2 is engaged.
Action Needed - Disengage mute switch.
Possible Cause - Speaker cables not conneted from woofer cabinet.
Action Needed - Connect speaker cables and make sure NL4 is locked in place (¼ turn clockwise)
AtlasSound.com
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: 800.876.3333 • Fax: 800.765.3435
– 8 –
Specifications are subject to change without notice.
Owner's Manual