Bosch Series 4 Informations pour l'utilisation - Page 11

Parcourez en ligne ou téléchargez le pdf Informations pour l'utilisation pour {nom_de_la_catégorie} Bosch Series 4. Bosch Series 4 24 pages. Free standing cooker
Également pour Bosch Series 4 : Manuel d'instruction (24 pages), Manuel d'instruction (44 pages), Manuel d'instructions pour l'installation et l'utilisation (16 pages), Manuel d'instructions pour l'installation et l'utilisation (16 pages), Manuel d'instruction (16 pages), Manuel d'instruction (24 pages), Manuel d'instruction (10 pages), Manuel d'instruction (12 pages), Manuel d'instruction (20 pages), Manuel d'instruction (32 pages), Manuel d'instructions d'installation (12 pages), Manuel (2 pages), Manuel de référence rapide (2 pages), Manuel de l'utilisateur (16 pages), Manuel d'instruction (50 pages), Manuel d'instruction (48 pages), Informations pour l'utilisation (32 pages), Informations pour l'utilisation (32 pages), Manuel de l'utilisateur (32 pages), Informations pour l'utilisation (32 pages), Manuel d'instruction (24 pages), Manuel d'utilisation (27 pages), Manuel de l'utilisateur et instructions d'installation (40 pages), Informations pour l'utilisation (32 pages), Manuel d'instruction (36 pages), Manuel de l'utilisateur (24 pages), Manuel d'utilisation (47 pages), Manuel de l'utilisateur et instructions d'installation (28 pages)

Imprimer la page
Bosch Series 4 Informations pour l'utilisation
9.3 Automatic start for the ventilation
system
If you select a power level for a cooking zone, the auto-
matic start switches on.
The ventilation system starts at the corresponding
power level. You can find out how to change this set-
ting in section
→ "Basic settings", Page 12.
9.4 Run-on function for the ventilation
system
The run-on function leaves the ventilation system run-
ning for a few minutes after the hob has been switched
off. This allows you to remove any cooking fumes that
remain. The ventilation system then automatically
switches off.
Activating the fan run-on
As standard, the run-on time is activated with a max-
imum switch-off time.
10  Time-setting options
Your hob has various functions for setting the cooking
time:
¡ Switch-off timer
¡ Timer
10.1 Switch-off timer
Allows you to programme a cooking time for a hotplate
and its automatic switch-off once the set time has
elapsed.
Programming the cooking time
Select the cooking zone and the required power
1.
level.
Touch
⁠ .
2.
a The ⁠   display lights up in the cooking zone.
Use
⁠   or  ⁠   to select the cooking time.
3.
a The time begins to count down.
Note: You can automatically set the same cooking time
for all cooking zones. You can find more information
about this under 
→ "Basic settings", Page 12.
11  PowerBoost
The PowerBoost function enables you to heat up large
quantities of water faster than when using power
level  ⁠ .
This function is available for all cooking zones,
provided the other cooking zone in the same group is
not in use.
You can find out how to change this setting in section
→ "Basic settings", Page 12.
Note: The run-on function only switches on if at least
one cooking zone has been switched on for at least
one minute.
Deactivating the fan run-on
Manually
To deactivate the function, touch  ⁠ .
Automatically
The appliance deactivates the run-on function if:
¡ The run-on time has elapsed.
¡ You switch the appliance on again.
Changing or deleting the cooking time
Select the cooking zone.
1.
Touch  ⁠ .
2.
To change the cooking time, touch  ⁠   or 
3.
to  ⁠ ⁠ .
10.2 Timer
Enables the activation of a timer of 0–99 minutes. This
function can be used independently of the cooking
zones and other settings. It does not automatically
switch off the hotplates.
Setting the kitchen timer
Select the hotplate and touch
1.
beside 
lights up.
a
Use
⁠   or 
to select the required time.
2.
a The time counts down.
Changing or deleting the timer duration
Touch  ⁠ repeatedly until the ⁠   display beside 
1.
lights up.
To change the cooking time, touch  ⁠   or 
2.
to  ⁠ ⁠ .
Otherwise, ⁠   and  ⁠ flash in the display for the selected
cooking zone. ⁠   is then set automatically without activ-
ating the function.
Time-setting options en
or set it
twice.
or set it
11