ABSCO SHEDS 15141RK Manuel d'assemblage et d'instruction - Page 6
Parcourez en ligne ou téléchargez le pdf Manuel d'assemblage et d'instruction pour {nom_de_la_catégorie} ABSCO SHEDS 15141RK. ABSCO SHEDS 15141RK 20 pages. N3/c1 frame kit
Imprimer la page
INSTALL EXTRA FASTENERS - INTERIOR VIEW
"C" - Roof panel to ridge beam.
Pre-drill from inside the shed upward through the ridge beam and into the roof panel at 148mm
centres, (every pan) then fix with a screw. Some screws will already be in these positions, skip these.
For illustrative purposes fasteners are shown on just one side of the
"G" - Wall sheet to top wall channel.
Pre-drill from inside the shed through the inside face of the top channel and into the wall sheet
at 148mm centres, (every pan) and then fix with a screw. Do this on the front and back walls only.
Additional FAST001 for front wall.
Absco Industries
Assembly Instruction Manual
N3/C1 FRAME KIT
FOR 1.5m WIDE TO
1.5m DEEP MODELS
ridge beam.
Repeat again to other side.
means pre-drill 3mm hole
Additional FAST001 for rear wall
Model: CYC15
D
and fix with FAST001
02/03/2021
1.0
6